Hello. The last few days I have noticed that I miss some income calls in my t-rex. That happens, propably, after latest update to v.1.0.0.2. I have done, once, factory reset, but it didn't fix it. Please is there any solution?
Related
I've been dealing with connection issue on my Asus Zenwatch 2 since updating it 2.0. Sometimes when I try to use Google Assistant it comes up with error saying "Can't reach Google at the moment." When this happens the watch will show Bluetooth is disconnected in the connectivity settings, however my phone shows it's still connected and I still receive notifications as usually. The only thing I can't do is use voice features. Now when I'm connected to Wifi works perfectly fine, it just happens mainly on a mobile data/Bluetooth connection. If I reboot my phone and watch the issue will correct itself for a while.
Things I've tried:
-Factory resetting at least 5 times.
-Wiping the cache through recovery mode.
-Factory resetting my phone.
My devices and builds
Phone - ZTE Blade X Max (Z983) - Android 7.1.1
Build Z983V1.5.19
Watch - Asus Zenwatch 2 - Android 7.1.1
Build NWD1.170706.001
I apologized if this isn't the place to post this here. I'm new here!
Just not sure if it's man issue on the watch or phone side. Any insight is greatly appreciated! Thanks.
I've had similar issues when music is playing. If I use my watch to pause the music, then voice commands start working again. Try playing/pausing music with your watch, then try using voice commands again.
I don't mean to revive a dead thread, but I too am having the exact same problem as OP
/me too.
Me too, Ticwatch E, so recent watch.
Hi all,
maybe this will help you. I have had the same issue. But it's solved now:
https://support.google.com/androidwear/thread/41855
Hi all,
Thanks for taking the time to read.
I bought my Bip back in February and it has been a joy to use. About 3 weeks ago I opened the MiFit app and it said as it often did that there was a new firmware and proceeded to run an update. It had done this many times before without a problem. This time however when returning to the watch it said "Connect to APP to update". I tried connecting it to the app but each time I pressed tick on the watch the phone gave an error that the connection was refused. I checked the Amazfit support pages and followed the suggestions of rebooting the phone, forgetting the watch in the app and then in the bluetooth settings on the phone but the problem still persists. I tried it on the wife's iphone to rule out my handset but got the same error. The watch is not visible in the bluetooth settings of the phone.
Video of problem: /drive.google.com/file/d/11ftktWFmqf4dFrWyyg9fMEOrCNhr3kEn/view?usp=sharing
Since then I have tried on an Android phone and got a bit further. With Android I can pair through bluetooth but when running the MiFit app I get an error that the connection fails when trying to pair up the watch. I then installed the "Notify and Fitness" app which does see the watch however on attempting to update the firmware or resources it fails at 98-99%. When using the tests in the app I can get the watch to run a heart rate test and vibrate. Also if I flash with a chinese res file then the language of the error also changes.
I have tried using the two alternative methods of update, new and old firmware but to no avail. I have also tried doing this without the MiFit ap installed and firmware updates through gadget bridge.
One last thing to try is for the battery to run down and restart the thing but I am still a week at least away from 0% and Have been trying to fix it for a fortnight
Do any of teh gurus of XDA have any tips or suggestions of what else I could try?
Thanks in advance!
Any solution in 2019 using iphone?
Hello.
Did you solve this problem?
I found solutions but they were wrote more than a year ago...
And all of them used android phones to install new (now old) firmwares, but I only can use my iphone...
nategs said:
Hi all,
Thanks for taking the time to read.
I bought my Bip back in February and it has been a joy to use. About 3 weeks ago I opened the MiFit app and it said as it often did that there was a new firmware and proceeded to run an update. It had done this many times before without a problem. This time however when returning to the watch it said "Connect to APP to update". I tried connecting it to the app but each time I pressed tick on the watch the phone gave an error that the connection was refused. I checked the Amazfit support pages and followed the suggestions of rebooting the phone, forgetting the watch in the app and then in the bluetooth settings on the phone but the problem still persists. I tried it on the wife's iphone to rule out my handset but got the same error. The watch is not visible in the bluetooth settings of the phone.
Video of problem: /drive.google.com/file/d/11ftktWFmqf4dFrWyyg9fMEOrCNhr3kEn/view?usp=sharing
Since then I have tried on an Android phone and got a bit further. With Android I can pair through bluetooth but when running the MiFit app I get an error that the connection fails when trying to pair up the watch. I then installed the "Notify and Fitness" app which does see the watch however on attempting to update the firmware or resources it fails at 98-99%. When using the tests in the app I can get the watch to run a heart rate test and vibrate. Also if I flash with a chinese res file then the language of the error also changes.
I have tried using the two alternative methods of update, new and old firmware but to no avail. I have also tried doing this without the MiFit ap installed and firmware updates through gadget bridge.
One last thing to try is for the battery to run down and restart the thing but I am still a week at least away from 0% and Have been trying to fix it for a fortnight
Do any of teh gurus of XDA have any tips or suggestions of what else I could try?
Thanks in advance!
Click to expand...
Click to collapse
I let it run down helped along by repeated vibration tests but eventually after about 3 weeks the thing ran out of juice. Charged it and started it back up and it booted up fine, it has been fine since! great little watch but really needs a hard reset button.
Good luck
Been using the unit for 2 weeks or so. All of a sudden, there's no ecreen output at all.
It vibrates, it syncs to the amazfit app, it charges and the HR monitor does work.
Any idea on what happened? Should I RMA or is there any method to reset it and try my luck?
Ok, nevermind: Went to unpair it in order to RMA and it rebooted after clearing the data, and the screen came back to life.
If you ask me, this does not seem like a hardware issue... :S
How you have cleared the data withour screen not working?
rajithaw said:
How you have cleared the data withour screen not working?
Click to expand...
Click to collapse
Unpairing the watch from the amazfit app.
I had this happen another two times.
Last time it happened I refused to restore the settings when pairing it again and did not have this issue anymore (so far).
Happens to me as well.
Everyone it happens, I attempt to upload a new watchface via the Amazfit app, which causes the software to reboot. After the reboot everything works.
Looks like software issue to me.
Sent from my LYA-L29 using Tapatalk
blanck screen issue
i followed your instructions but it does not work my gts smartwatch screen does not work please help with another solution
Hey guys,
I'm using Amazfit gtr 47mm smartwatch and it was stuck in the bootloop while i try to do restore.
Today the watch didn't connect with smartphone and I tried several times but no use. and I decided to do the factory reset. after that the watch doesn't came back and stucked in the bootloop.
if anyone facing the same issue please reply.
If anyone would like contact personally
use my mail. [email protected]
Dear friends, I know there probably is a thread on this, I just cannot find it, so I apologize for starting a new one.
I have GTR 2e which is about 2/3 years old. Recently all the lights on the back stopped flashing and it will not pair with my iPhone any longer. It boots up normally but after I did a factory reset it now only starts up in with the QR code - I cannot see it in my bluetooth devices list on my phone not can I discover it in the Zepp app. Any help please