I have 3 bricked Lumia 800 here.
Two of them are in 9008 mode directly when plugged into the USB port. Both of them can be recognized by Nokia Care Suite as products in flashing mode however cannot be flashed since NCS cannot read its product code. I tried to use QFIL to flash it however there is no firehose file for MSM8225 and corresponding rawprogram0.xml.
As for the other one, it can be recognized as "Care Suite USB Connectivity", and can flashed by NCS however it shows:
ERROR: OSBL reported an error! Code: 0x30022
Related
hello there!
i have a problem with this device.
i can't flash / unlock. all the drivers are ok, NSS PRO detects phone in normal mode, read all infos, but when choose OSBL mode, screen goes black, short vibrate and nothing happens after. phone is not detected anymore, but in device manager, there is "Qualcomm CDMA Technologies MSM" with an yellow exclamation mark. i tried this on 2 pcs WIN7, 2 laptops WIN7, 1pc WINXP. no luck. i even run ubuntu into a virtual machine. it displayed "Qualcomm CDMA Technologies MSM" , i done the connection, but the drive Qualcomm MMC does not appear in device utility.
NCSD Version: 1.9
SW Version: 1750.0805.8773.12220
HW Version: 112.1402.2.3
am i elligible to flash phone?
yes you are...
Follow this
http://forum.xda-developers.com/showthread.php?t=1669498
thank you for reply. i done that before opening thread. all drivers installed, but still no luck. phone goes in OSBL mode, but can't find any driver
PS: NSS can't detect phone as "nand disk" because of drivers, i guess.
lumia
if your phone doesnt come up as a flash disc then your not able to flash a custom rom regardless if it is detected as qualcomm msm, as i have found with few lumias i have had there seems to be a version of the boot loader which was just before nokia went to dload.
rob:good:
can i flash a custom rom with "traditional" softwares, like phoenix, jaf, ncs?
kaytar said:
thank you for reply. i done that before opening thread. all drivers installed, but still no luck. phone goes in OSBL mode, but can't find any driver
PS: NSS can't detect phone as "nand disk" because of drivers, i guess.
Click to expand...
Click to collapse
be sure you are running NSS as admin
good luck
I have a H960A Version, i'm in the this situation.I have a LG V10 that all i can get it to do is show on screen is a qualcomm driver when plugged in to a pc. Can it be flashed back to stock to unbrick it? How can i flash stock firmware, boot and recovery from fastboot?
Or how can i enter in download mode?
please help me
pd: the manager divices in my pc see qualcomm hs-usb qdloader 9008
Hi guys,
i have been searching the whole internet but i found no workable solution.
I have hard bricked my Vodafone Tablet Smart 4.
Current status:
- i put the charge cable into the tab, but nothing happens
- i can push any button, but nothing happens
I connected it with the computer and the computer recognized the tab as unknown device (yes, now i could install any driver, e.g. Qualcomm HS-USB QDLoader 9008) for 35 seconds (Debug Mode).
I have tested many possible software solutions (e.g. QcomDloader, Qualcomm Snapdragon Flash Tool, SP-Flash-Tool Version 3.*, 4.*, 5.*).
Now my question:
Is there any way to rewrite a new bootloader/ preloader partition on this tab? Or can i flash a new firmware directly to the Qualcomm CPU?
best regards
Olaf
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-fix-totally-dead-redmi-note-4-t3746465/page1
Hope it helps you
Sent from my mido using XDA Labs
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
1. Remove the back panel then the battery connector. Keep it in that way for a while like a minute
2. Then short either the 'most effective points' or 'less effective points' following this thread . While keeping them short, connect the USB cable to the Computer, it will enter into 'download' mode suitable for miFlash/QFIL
I have the A025u, and while trying to flash it with the U1 firmware, which I have seen all over the place being successful on many android phones, I made a stupid mistake and ended up formatting the entire eMMC chip with TWRP.
Needless to say, I've hard bricked it.
It will recognize in qualcomm ..... 9008 mode whenever plugged into the PC, but I am having some major issues.
I have tried the Uni-Android Tool, various EDL flasher tools posted online, I have tried QPST with QFIL, probably other things I can remember at this point, ive been at this for well over a week, almost all day and night.
Ive tried many versions of the usb drivers, ive changed all sorts of windows setting, including turning driver verification off, turning on test mode, blah blah blah.
tried multiple USB cables, tried every USB port on the PC with every one of the cables, and every one of the drivers and every one of the pieces of software with every one of the firehoses I have..... tried ALL permutations.
Ive tried firehoses from a dozen different sources, including spending 19 dollars on a subscription to a BS website just to get an "official" one tonight, tried everythiung i can possibly find anywhere on the internet to get this working, and i still get the equivalent of the same error.
here is the log from the UAT:
1. Power off device
2. Press and hold volume up + volume down insert usb cable
3. In some case requires special edl cable or test points
4. Install Qualcomm drivers if needed
====================================
- Connection : EDL
- Method : Custom firhose loader
- Process : Fix 9008 port
====================================
Waiting for QDLoader port ...
Port found
Device on Port : [ COM15 : Qualcomm HS-USB QDLoader 9008 ]
Analyzing Sahara please wait ...
HW_ID : 0001E0A9000 | Snapdragon 625
BLOCK_ID_S : C3567420
BLOCK_ID_H : 2S12597357O58Q66Q90N4S37770N92OQ
BLOCK_ID_H : 763P24Q815492SR2O14246567172NP2Q
Executing boot : Failed
Please use correct loader or check USB cable | Port
Ive attached screenshot of the error in QFIL.
every single way I try is giving me a sahara error!
PLEASE HELP!!!
(Repetition keeps views up!)