Help, black screen after install any custom rom SM-a105M - Samsung Galaxy A10 Questions & Answers

Tittle, how to fix it? Its this model compatible with 64bits roms?

maid97s said:
Tittle, how to fix it? Its this model compatible with 64bits roms?
Click to expand...
Click to collapse
Yes, Galaxy A10 is compatible with 64Bit ROMs. The One UI skin that comes installed is 64Bit as well, but running in 32Bit mode. You may have soft-bricked your phone, if the phone doesn't boot up after showing the Galaxy A10 logo and bootloader warning.

AlexTECPlayz said:
Yes, Galaxy A10 is compatible with 64Bit ROMs. The One UI skin that comes installed is 64Bit as well, but running in 32Bit mode. You may have soft-bricked your phone, if the phone doesn't boot up after showing the Galaxy A10 logo and bootloader warning.
Click to expand...
Click to collapse
it stuck at Galaxy A10 when i install any rom, but i can go back to recovery mode

maid97s said:
it stuck at Galaxy A10 when i install any rom, but i can go back to recovery mode
Click to expand...
Click to collapse
It depends on how you are installing that custom ROM, you need to previously format data among other steps.

Related

[Q] samsung galaxy s3 i9300 rom install problem

i have a samsung galaxy s3 i9300 16gb
currently i have the cyanogenmod 10.2.0-i9300 baseband 19300UBEMH1 which its the only rom i can install on my phone
everytime i try to install a new rom i get the status 7 or status 6 error even if i tried to modify the rom so can pass the verification
any ideeas ?
thank you
andreyus said:
i have a samsung galaxy s3 i9300 16gb
currently i have the cyanogenmod 10.2.0-i9300 baseband 19300UBEMH1 which its the only rom i can install on my phone
everytime i try to install a new rom i get the status 7 or status 6 error even if i tried to modify the rom so can pass the verification
any ideeas ?
thank you
Click to expand...
Click to collapse
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
tallman43 said:
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
Click to expand...
Click to collapse
i have tried all cwm twrp also philz touch , also few stock firmwares and still nothing i use samsung phones for 4 years and never happened this thing
andreyus said:
i have tried all cwm twrp also philz touch , also few stock firmwares and still nothing i use samsung phones for 4 years and never happened this thing
Click to expand...
Click to collapse
Strange Also I take it that you mean you have tried to alter the updater script when you modified the roms?
I would suggest to flash back to stock with Odin and start again and see if that helps sorry I can't be of much more help.
tallman43 said:
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
Click to expand...
Click to collapse
tallman43 said:
Strange Also I take it that you mean you have tried to alter the updater script when you modified the roms?
I would suggest to flash back to stock with Odin and start again and see if that helps sorry I can't be of much more help.
Click to expand...
Click to collapse
ive tried that for lots of times , so now im using this cm10.2 its working fine but i want to try a custom rom
anyway thanks for help mate
The recovery version must be the culprit. Why dont you install twrp from playstore? There's an app called TWTP manager. After installing twrp dont let the app reboot for you. Reboot it first then reboot into recovery the second time. Then try to install another rom
Sent from my SM-N910T using XDA Free mobile app

Stuck after ROM install

Hello,
I use the data on your link to install the custom ROM:
http://forum.xda-developers.com/moto-z/development/rom-cyanogenmod14-1-moto-z-t3514432/page14
Now the install is done but the phone stuc on the page written "your device has been unlocked and can't be trusted lock"
The phone keeps reboot and can boot to the main android page.
How can I unstuck my phone?
Thankyou.
xav12358 said:
Hello,
I use the data on your link to install the custom ROM:
http://forum.xda-developers.com/moto-z/development/rom-cyanogenmod14-1-moto-z-t3514432/page14
Now the install is done but the phone stuc on the page written "your device has been unlocked and can't be trusted lock"
The phone keeps reboot and can boot to the main android page.
How can I unstuck my phone?
Thankyou.
Click to expand...
Click to collapse
Were you on android 7.0 before installing? If so that's why and you'll have to flash stock android 7.0. Unless I've missed something there's no way to downgrade and no way to flash that ROM on the new bootloader in android 7.0
supacrazyguy42 said:
Were you on android 7.0 before installing? If so that's why and you'll have to flash stock android 7.0. Unless I've missed something there's no way to downgrade and no way to flash that ROM on the new bootloader in android 7.0
Click to expand...
Click to collapse
My previous version was android 6.0. Is there a reason why this don't work properly?
xav12358 said:
My previous version was android 6.0. Is there a reason why this don't work properly?
Click to expand...
Click to collapse
I'm not sure then if you were on android 6.0.1, it seems someone is having a similar issue on the original thread, I'd ask there. Perhaps it's a problem with a certain version of the ROM.
How can I check the previous version of android ?

Galaxy s2 i9100 soft brick help

I just got a samsing galaxy s2 i9100. It does not connect to my pc (device descriptor failed) and it has been soft bricked i have tried to install another firmware but it gives me error singnature verification fail. Please help me My android recovery system is 3e. Thank u.
Did you already have a custom firmware on? I managed to get around my soft brick by loading on the stock rom
redukdaz said:
Did you already have a custom firmware on? I managed to get around my soft brick by loading on the stock rom
Click to expand...
Click to collapse
no I had the original 4.4.2 plus how did you connect your s2 to pc
Look at my posts here - https://forum.xda-developers.com/galaxy-s2/help/sgsii-bootloader-t3686898
Thanks guys, I updated the operator firmware to the latest one I could find, it now boots up thankfully
I'm trying to install the custom recovery trwp on it via odin, but for some reason it doesn't work, could you point me in the right direction? I've looked at so many posts I'm googly eyed now :cyclops:
Thankyou :good:
098765 said:
no I had the original 4.4.2 plus how did you connect your s2 to pc
Click to expand...
Click to collapse
toy_story said:
Look at my posts here - https://forum.xda-developers.com/galaxy-s2/help/sgsii-bootloader-t3686898
Click to expand...
Click to collapse

Install Android 12 in M 40

Hi guys I am trying to install Android 12 in M40 and wipe everything of Samsung. Any suggestions?
Any one?
Akhil137 said:
Hi guys I am trying to install Android 12 in M40 and wipe everything of Samsung. Any suggestions?
Click to expand...
Click to collapse
Please try, there was also a thought to install, because the standard firmware is terrible
Akhil137 said:
Hi guys I am trying to install Android 12 in M40 and wipe everything of Samsung. Any suggestions?
Click to expand...
Click to collapse
Have you tried installing any GSI firmware based on Android 11 other than PHH's GSI?
deadinside322 said:
Have you tried installing any GSI firmware based on Android 11 other than PHH's GSI?
Click to expand...
Click to collapse
Trying to install GSI but CMD stuck at waiting for device at the android recovery>install through ADB. Not sure y it's keep on happening.
Also used to sideload command but getting unauthorised signature like something.
Any help?
@Akhil137 Hey, have you managed to port TWRP or any custom recovery for our Galaxy M40 with Android 11?
rohitrss said:
@Akhil137 Hey, have you managed to port TWRP or any custom recovery for our Galaxy M40 with Android 11?
Click to expand...
Click to collapse
No, I don't find any way to install recovery to m40
Hey we got first TWRP recovery, please verify if its working for you [Recovery] TWRP for Samsung M40 (SM-M405F)
rohitrss said:
Hey we got first TWRP recovery, please verify if its working for you [Recovery] TWRP for Samsung M40 (SM-M405F)
Click to expand...
Click to collapse
tried it using Odin but not working, stuck on file analysis.
Akhil137 said:
tried it using Odin but not working, stuck on file analysis.
Click to expand...
Click to collapse
Replied you in the same thread.

Samsung Galaxy S6 Edge G925F

My phone was already rooted and I have installed twrp recovery but Am try many custom Rom to installed all of them can't be installed how i can fix this and how i can get any custom Rom of Samsung S6 edge.
Hello, what is the problem? Explain, the error message.
Am fail to install custom rom by using Twrp Recovery but my phone was rooted already.
Raja Mastory said:
Am fail to install custom rom by using Twrp Recovery but my phone was rooted already.
Click to expand...
Click to collapse
Okay, I mean what's the problem? Do you receive an error message? Brick device? Black/White screen?

Categories

Resources