Is it possible to replace 2.10 Olipro with 2.30 Olipro Hard SPL and what is difference between two versions? What is benefits on v2.30?
I believe the main reason 2.30 came about was because Olipro was trying to come up with a developers SPL to make it more compatible with MTTY. 2.30 was a test phase and wasn't what he wanted, 2.60 came out and 2.30 wasn't actually "officially" released... You can get Hard SPL ver7 (2.10) and Ver 9 (2.60) but I haven't found 2.30 on these forums. 2.60 is for developers who are creating roms/apps for the Hermes and isn't needed by the layperson who just wants to flash roms with some security.
My advice stay with 2.10. It seems stable and good, got me out of a few fixes too... Unless you want to be a developer you don't need 2.60 as there were issues with it too... I've also noticed a few people with 2.30 saying that their Hermes keeps exiting into bootloader and they have had trouble fixing.
Cheers...
Thanks for quick reply. I will stay at v2.10 Olipro.
Thank you ultramag69.
Related
Hi all
reading some signatures of someone on this forum I've read that there is a version 1.04 of the Ipl.
I have the 1.01, exactly what changes between the two different versions? and how I can improve to 1.04?
cabi.costa said:
Hi all
reading some signatures of someone on this forum I've read that there is a version 1.04 of the Ipl.
I have the 1.01, exactly what changes between the two different versions? and how I can improve to 1.04?
Click to expand...
Click to collapse
Put Hard-SPL v.7 on your device and you will get it.
Just done but results are unpleasantly SPL v2.10 Olipro and IPL v1.01
cabi.costa said:
Just done but results are unpleasantly SPL v2.10 Olipro and IPL v1.01
Click to expand...
Click to collapse
Why is that unpleasant? (they are better than 1.04 for all normal users)
Agree with Joedoe and Sambartle; just use Hard SPL v7 and it takes care of the bootloader for you. Don't need to do anything else.
Guys this user is talking about IPL...not SPL...
If you follow my HardSPL install guide...you will have IPL 1.04 once it is complete.
what changes from 1.01? why an user some post before says that is better 1.01?however thank you vanx i've just flashed my phone with your guide and it's fantastic..
mrvanx said:
Guys this user is talking about IPL...not SPL...
Click to expand...
Click to collapse
Doesn't flashing hardspl do both though?
mrvanx said:
Guys this user is talking about IPL...not SPL...
If you follow my HardSPL install guide...you will have IPL 1.04 once it is complete.
Click to expand...
Click to collapse
Hello Mrvanx,
Your install guide appears OK for my Softbank X01HT with the following information. Please confirm.
Do I need to upgrade the Radio Rom before upgrading to WM6
IPL 1.01
SPL 1.09
ROM ver. 1.23.708.4
ROM date 07/24/06
Radio ver 1.06.00.10
Comm Protocl ver 32.37.7010.01W
Best Regards
Ken
Yes you need it and before did everything flash the booloader with the HardSplV7..and there's a 1.48.00.00 radio out now..
So someone could tell me the differences between an IPL 1.01 and IPL 1.04?
So no-one could tell me what are the differences between an IPL 1.01 and IPL 1.04?
I Know i am being noobish,but to learn more i need to put questions like this to you guys.Hope that i will get sufficient help from you guys.
I need to downgrade to imate full shipped wm5 rom for some reason.I have selected the rom i wish to download.
i-mate English CDL__001 1.31.305.2 09/08/06 1.31.305.104 1.38.30.10 32.71.7020.12H 14955.2.3.0 2.3 1.11 108
I am currently using Olipro Hard spl V7 with TnT rom and 1.54 radio varient.
I wish to do full degrade,rom as well as radio.
Any Body guide me through this tricky process,i consulted mr.vanx guides but that degrades only the os part but i want a full degrade.
mrvanx's guide for downgrad is quite straightforward. If you look at it, you should understand that by dowgrading 2.10.Olipro to 1.10.Olipro, you will have a base which will allow itself to be downgraded to shipped SPL. Forget doing anything with radio or OS at this point, you don't need to.
AFTER you have 1.10.Olipro visualy CONFIRMED on the BL screen, flash your desired ROM. Make sure, your radio BL is 108 ( which it seems).
OK ,
1- I should degrade 2.10 olipro to 1.10 olipro
2-I just flash the shipped wm5 rom i downloaded
Am i right?
max414 said:
OK ,
1- I should degrade 2.10 olipro to 1.10 olipro
2-I just flash the shipped wm5 rom i downloaded
Am i right?
Click to expand...
Click to collapse
That will do it.
Will that degrade my radio as well as spl?
max414 said:
Will that degrade my radio as well as spl?
Click to expand...
Click to collapse
It will. Just make sure that the radio BL version is the same (108 I believe). From other posts and Wiki, you can read that you can downgrade radio BL from 108 to 107 but NOT BELOW THAT. Or you will brick your phone. So I would recomend staying with BL 108. Anything up from 1.33 based on the wiki list.
rronge said:
It will. Just make sure that the radio BL version is the same (108 I believe). From other posts and Wiki, you can read that you can downgrade radio BL from 108 to 107 but NOT BELOW THAT. Or you will brick your phone. So I would recomend staying with BL 108. Anything up from 1.33 based on the wiki list.
Click to expand...
Click to collapse
Will 1.10 olipro do the job?or do i need to degrade to retail spl like spl 1.04 or spl 1.06?As stated here...
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
max414 said:
Will 1.10 olipro do the job?or do i need to degrade to retail spl like spl 1.04 or spl 1.06?As stated here...
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Click to expand...
Click to collapse
As I said in post #2, you don't need to. Flashing shipped on top of 1.10.Olipro WILL reflash the SPL! Read it again.
Could anyone provide me with info on how to downgrade to WM5? I need to do this for warranty purposes. The guide isn't online anymore for a few months at http://www.mrvanx.org/.
I would like to downgrade my wm6.1 to wm5 or wm6 (official roms T-mobile NL).
Thanks for your help
Since the guide to downgrade is still offline, I don't know how to handle.
I have searched the forums, but everyone keeps on linking to this guide of mrvanx.
I found this thread where mrvanx provides
this link to download SPL 1.10.oli. Since I understand I will first have to flash to 1.10 olipro before flashing the factory default SPL.
After I have used this I keep on getting ERROR [260] : UPDATE ERROR
Can anyone please tell me how I should downgrade my Device?
I have WM 6.1
Radio version: 1.54.07.00
And still 2.10 olipro
thx
I stuck there now.
No guide for downgrading to WM5,
My phone is dopod 838pro, and SPL now is 2.10 olipro
Anyone can tell me where to get it?
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Please don't reply asking me to search ...
I did and actually didn't find anywhere
the Hard SPL 3.5 for Athena
Anyone to know and post a source?
Thx a million
You didn't search enough
If your Athena is already unlocked and with SPL 1.2, just flash AP4 because it contains the SPL3.5 upgrader and there is not stand alone SPL3.5 upgrader yet ( read cmonex posts) and from there you can flash any other SPL 3.5 rom, or keep AP4 as its excellent anyway.
If the athena has the stock SPL just unlock it with Olinex unlocker firs, search how to do this properly to avoid problems and yes the unlocker AP4 and instructions how to do and procedures to follow shall you got into problems are easy to find.
good luck
I upgraded my QTEK s200 to bikertibi version 23071 full using bikertibi Prophet_Upgrade
I first tried to use SoftSPL but when it didn't work I used bikertibi tool to perform HardSPL
The upgrade went OK and I tried this version for a short time.
Because there is not much ram available I wanted to change to a different version
Every other version I tried ended up in the Bootloader screen (3 colors) after rebooting at the end of burn sequence.
Current version of SPL is:
IPL 2.09
SPL 2.20
I can go back to the original WM5 version I got RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship
but after that I cannot burn any WM6.5 version
Any help is appreciated
Moti
moti1010 said:
IPL 2.09
SPL 2.20
Click to expand...
Click to collapse
SPL: 2.09 ===>Hard SPL has not been performed.
So, simply perform it again, using bikertibi's tool or others in the forum.
You can use every ROM after that, (When you have SPL: 2.G4.4PDA)
babak00000 said:
(When you have SPL: 2.G4.4PDA)
Click to expand...
Click to collapse
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
joolay said:
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
Click to expand...
Click to collapse
When you have SPL: 2.G4.4PDA
Click to expand...
Click to collapse
SPL: 2.G4.4PDA or SPL: 2.G3.4PDA
Thanks Joolay for your accuracy
Thank's for the help.
I later succeeded in performing Soft SPL and burning a new ROM
Moti