I received a HTC hermes with no radio working. when i try to flash it with new radio, like the sim unlock radio, it tells me that it can't communicate with the PDA or othertimes it start the flash but freeze at 1%. sometimes on the boot screen I got the message "No GSM" sometimes not, but the radio never works and the OS is starting.
I tried to flash it with a USB Monitor running (the radio for simunlock), and the file is in attachment
at 1% when it freezes, this is the part 'entering radio bootloader' in the file...
I tried a checkimage with mtty, when it cheks Radio Image CRC Cheksum, it returns 0x0 after about 1 minuts of freeze.
at Bootloader, i get IPL 1.00 and SPL 2.06 but before trying a flash (don't remember wich one) i had IPL 1.04 and SPL was a HardSPL olipo.
At HTC boot page i got: M5 S4 B6 D3.62 PQD18
If someone have an idea?
(sorry if my english is bad, i'm french )
Related
Using XP, I am trying to upgrade from radio 1.16.00.00 to radio 1.20.31.10. I have followed the instructions in the Hermes Upgrade Guide to the letter. I have tried sever times, but I continue to get ERROR 114. Each time the phone says "Upgrade Radio Stack Please Wait..." and the upgrading process never moves from 0% on the desktop (yes, I closed process wcescomm.exe before starting.) I have also tried doing another upgrade right after the error 114 message, without disconnecting the phone nor reseting, but I get ERROR 150.
Any ideas would be helpful.
Ron
Current Setup:
ROM: 1.34.502.1 Cingular
Radio: 1.16.00.00
BL: 1.04
Task 32: 0
History:
1) Phone came loaded with Cingular ROM 1.34
2) Downgraded to Cingular ROM 1.30 to get BL1.04
3) SuperCID unlock automatically with HTC_Hermes_SIM_CID_Unlock_v3 (GREAT PROGRAM!!!)
4) Used SSPL-HERM.exe to change ROM back to Cingular 1.34
5) UNSUCCESSFULLY tried to upgrade Radio Version to 1.20
Well, I was doing everything right... but my computer was refusing to cooperate with me. Because I did the exact same thing on my wifes computer and it worked!!!
Thanks
Ron
Hi i have a Cingular 8525 and ran cid unlocker and bootlogger 1.0. i tried to install just radio upgrade 1.34 and it gets to 95 percent and i get an error message (three times) tried hard reset and it continues to go back to the bootlogger mode.
ther is a 4 color screen
herm100
IPL-1.00
herm100 MFG
SPL-1.01
Did i brick the phone, i tried running bootlogger again to no avail.
thanks,
glenn
U may need install a special Bootloader 1.01 MFG!
Try understand this, should help !
In order to upgrade Radio Rom only - U will need >>
HERMES Bootloader 1.01 MFG
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
To install radio upgrades, you need Bootloader 1.04. 1.01MFG won't do radio images.
Upgrade to 1.04 and then flash again.
<sorry.. double post>
use mtty to upgrade your bootloader to 1.04, then re-flash
also, are you using the standard Hermes RUU to update? or the Magician MaUpgradeUt to upgrade the radio?
Try this. Boot to OS or if you can not boot then put in BL mode(tri color screen). Run this http://uploadingit.com/files/8194/NBH Radio Only 1.27.00.00.zip
You should have Radio 1.27 after that.
From the wiki on how to fix bricks:
connect via mtty
type: set 14 0
that worked for me.
I read all post (wiki instruction, also) about bricket hermes and kitl mode. Sorry, I can't put ansi log via usb monitor. But I put some situation from Mtty and Pb 5.0. Same situation is in Pb 6.0. Can somebody, please tell me what's happened with my Hermes? When I use original Ruu I get message "invalid vender Id" (probably radio area and cid corupted).
Orange spv m3100
herm100,
ipl 1.01,
spl 1.09.
kitl enabled.
no gsm,
stuck in splash (orange)...m05,s04,b06 d3.23.02 NO GSM.
When load PB 5.0 or 6.0 after ...Start....nothing happened. I also removed ril.dll...I think that PB cant recognize to download ext rom (to many bad blocks) and here stoped. Any idea how to disable in PB to load ext Rom? (maybe I am not in the right way about my opinion..???but I give a hope myself.)
Many Thank's in advance.
Hello everyone.
I've problem while unlocking my Herm(MDA Vario II form Era). I downloaded Unlock_v3a prom forum. SPL updated succesfully to 1.40 Olipro byt while installing Radio it stuck on 0%. Then i have only bootloader screen and I install WM 6 wersion of operator (but without Radio etc because when i tried install full it stuck on 12% - radio install). Anyone have some idea what's wrong?
Maybe it is SPL case?
Thanks for replies!
Ok i want to refresh my Thread. I was reading many articles about Hermes and my case now is like that.
My Radio is working i can talking by PDA but only with cards of it's operator, when i'm trying install Radio installation stops on 0% i try to install 1.14, 1.18 Radio but always with the same result.
My IPL is 1.01
SPL is 1.40 Olipro
Radio ver. 1.05.02.00
Running on WM 6
I need your help
My tytn is bricked
The Bootloader shows me HERM200 IPL-1.01 (White font, Red line)
HERM200 MFG SPL-1.01 (Yellow font) Redline)
I cant connect with my active sync anymore
The OS do not boot anymore
It shows my "no gsm"
It freezed by Windows Mobile Screen !
What can i do ?
Can anybody repair it ?
My english ist so bad, i come from Germany. SRY
I hope anybody can help me
Freeheld
press these buttons together: side ok button, power button and reset button,
then the HTC will go in USB mode and use some rom to flash it
thx for ur answer
when i try to flash it says me Error connecting
actice sync doesnt find my Tytn no conection
the tytn goes to the grey flash screen and interrupt it
can anybody tell my the right ROMs ?
i need a german roms and german radio rom
i have found my bricked Type
SPL HTC_BOOT Boot OS? No GSM? KITL
1.01MFG <=0107 No Yes ---
Diagnostic
bricked while flashing radio
Solution
Flash any type2 radio in NBF format, run RUU 2 times. If that doesn’t work, flash the radio using HERMflasher
i cant find "type2 radio roms in NBF format"
How i can see my HTC_BOOT ?
I crashed my tytn so hard
A new problem
Microsoft ActiveSync cannot recognize this device for one reason:
*The device was not connected properly.
.
.
.
And so one
How i can flash an new right ROM ?
You can flash from the SD-Card:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Here are the radio ROMs:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Thx but it doenst worked
i get an error
Loading...
than cant find file
but i renamed it write ???
how i can see that i have hardSPL
i dont beleave that i have it
and i cant install it because my activsync doenst work
If you're using XP - untick "Allow USB Connections" in activesync on pc. Put Hermes into bootloader and run the flash for Hard SPL V7. If this works then try an sd card flash for a different rom. No guarantees it will work but at this point, what have you got to loose?
Good Luck...
it doesnt work very well
i get an UPDATE ERROR
hmmmm
active sync is unticked (USB)
i have found a problem
i had flasched the bootloader 1.01MFG without SuperCID now i get Level= FF in mtty.exe, so i can flash back to 1.04 to install HARD SPL
How can i come back to 1.04 ?