Hey everyone!
I have a problem with Chainfire's unlock procedure. I have manged to unlock and root my GT7100 but when i tried to flash with WIPE then with full_ROM and then UPDATE my tab won't reboot. It gets stuck on the logo screen with an open lockette on the bottom and stays there.
According to this tutorial
http://forum.xda-developers.com/showthread.php?t=1232664
if the tab get stuck i'm supposed to use chainfire's unlock procedure to return the device to stock rom...
While the device recognises that it is connected to my pc and prompts me to press start on Odin program, the program does not recognize that the device is connected because when i press start i get this output:
<OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> BOOTLOADER_P7100BUKC8.tar.md5 is valid. <OSM> PDA_SIGNED_HRI83_BUKDF.tar.md5 is valid. <OSM> MODEM_HRI83_BUKDF_REV_03.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Extra info:
-The device is recognized as a fastboot device when i run fastboot devices.
-The device has wiped "sdcard" so there's nothing in there to work with.
-No matter how many times i've tried i can't use adb push because everywhere in these forums they refer to the target device as /sdcard/ which I cannot use and there is no possible target name i can use as the tab is not recognised by windows in this condition.
What do I do?
plz help!
First of questions should not be asked here as a main thread, it is dev, and probably best maybe to ask this question in the specific thread. Should have been asked in Q&A, mod please move.
1st Can you get into CWM recovery?
you say you can see device via adb, sdcard is mapped to /data/media/, can you see that?
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
ok! sorry about wrong posting place! i thought i could add it below the tutorial that i followed...
Anyhow...
@isimobile
I can only open recovery by executing
fastboot boot skitzandroid-recovery.zip
As far as I know (maybe i'm wrong) CWM need the tab to be in working condition...and all mine does is show the logo screen...
From the recovery menu that I get from the above command i can see the contents of my internal memory which at the moment is empty.
(there are no folders). I was thinking that maybe i could flash again using another custom rom or the stock rom (if i can find it anywhere that is) by tapping the update command in the recovery menu.
Thnx for the feedback!
Related
I'm a newbie. More than that; I'm an English teacher. So maybe I had no business rooting my Vibrant. But I was tired of waiting for 2.2, so I figured out how to load Axura on my rooted phone. And loved it, until it started lagging.
The mistake I made was my haste in trying to install Voodoo lag fix. I mistakenly downloaded the European version (for the i9000, instead of the T959); to compound matters, I got impatient and tried to hard boot the phone when it hadn't rebooted in five minutes.
Long story short: I figured out how to use Odin (on the Boot Camp partition of my MacBook); downloaded 1.7, along with the 512 pit file and the stock kernel. Managed to get a "Pass!" from Odin after only about 15 seconds.
But when the phone reboots, it always boots into recovery mode. I get the Vibrant splash screen, then E:Can't mount /dev/block/s111 (Invalid argument).
I've spent hours looking over the forums here, as well as on other sites, and can't find a solution. The most common suggestion is to download Eugene373's Froyo that won't brick--but it has apparently been pulled from the internet.
Any suggestions? I don't think it's hopeless, because I can get to the system recovery screen (although with only four choices: reboot system now; reinstall packages; delete all user data; delete cache data).
Thanks for any help anyone can give.
froyo has been out for the vibrant for a while.
start odin
get into download mode
plug phone in(should already be in)
make sure a com port is lit up in yellow
put these files in said sections:
PIT: http://www.divshare.com/direct/12692662-720.pit
PDA: http://www.divshare.com/direct/13144348-b8e.zip
check repartition to fix your filesystems(you must have loaded the above pit to do this or it wont go right)
click start
this will take you back to JK2(what i use for stock froyo)
Thank you very much. I knew it was something simple like this. I had the correct .pit file, but I was missing the right .tar file.
Now, I'm pleased to say that I'm out of the tarpit!
(I'm assuming that JK2 is a stock ROM that I flash back to when I get my nerves back and start trying out custom ROM's again.)
Similar issue...in ODIN hangs on setupconnection
Hi All,
I have a similar problem. I am a newbie too..so sorry for the ignorance. I have spent tons of time reading and have flashed ROMS several times successfully. But something happened, and I am unsure why.
I am now stuck in Vibrant logo screen. I am able to do the three button thing to get to Android system recovery (2e) screen. I cannot get to download screen, but ODIN recognizes the phone. Here is the message listed in Odin as it seems to be stuck on Setup Connection.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Eugene_2E_JK2_Froyo.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
My phone screen says
--Install from sdcard...
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted.
Now I know update.zip file was on there and a copy exist on external card. I have tried to run android-sdk-windows to use ADB to get to download screen but am unsuccessful- ADB is not a recognized command in cmd.
So now i have no phone :-(
Please help.
msz420 said:
Hi All,
I have a similar problem. I am a newbie too..so sorry for the ignorance. I have spent tons of time reading and have flashed ROMS several times successfully. But something happened, and I am unsure why.
I am now stuck in Vibrant logo screen. I am able to do the three button thing to get to Android system recovery (2e) screen. I cannot get to download screen, but ODIN recognizes the phone. Here is the message listed in Odin as it seems to be stuck on Setup Connection.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Eugene_2E_JK2_Froyo.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
My phone screen says
--Install from sdcard...
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted.
Now I know update.zip file was on there and a copy exist on external card. I have tried to run android-sdk-windows to use ADB to get to download screen but am unsuccessful- ADB is not a recognized command in cmd.
So now i have no phone :-(
Please help.
Click to expand...
Click to collapse
You're probably going into Download mode wrong, or hitting the wrong combo, follow this guide:
1. Take off your phone's back cover and take out your SIM card.
2. Take out your phone's battery
3. Attach your USB cable to your phone while plugged in and have ODIN ready on screen.
5. You should have your usb plugged in WITHOUT your battery plugged in. Now hold both volume keys down, and put the battery back in while STILL HOLDING DOWN THE VOLUME KEYS!!!
6. Download mode should be on screen.
7. Load the .pit and .tar files into ODIN, DO NOT CHECK RE PARTITION!!!!
8. Please be patient, if you get stuck at cache, unplug and try again, that should fix your problem.
Remember don't select repartition unless you know what you're doing. That's for fixing your phone if you're really ****ed up, just try it without it first...
Nevermind... for now... adb is C:\android-sdk-windows\platform-tools... earlier post had it is tools. Now i have the screen i need...fingers crossed...
Vibrant Stuck in recovery loop
my phone is stuck in a recovery loop. I have tried entering into download mode but,it goes back to recovery. The message i get is
E:Missing bitmap indeterminate1
code -7
-Install from package
Finding update package
you guys rock
I just wanted to take the time to thank you for posting this. Real life saver. Thanks
Hello everyone
i have a bad feeling of that my SGS2 is dead for good
this is what has happened:
1. I have been using CM9 for some time
2. but now im wanna go back to stock so i use odin and follows a guid i found here on the forum.
3. When i try to flash the phone with the rom i found nothing happens except the "logo loop" but the phone never starts.
4. I reboot the phone and finds another rom that should be working better.
5. When i start to flash in Odin i suddenly get "Fail" and everything freezes
6. So i pull out the battery and put it back in and try to boot in recover.
7. But i never get into recover cuz all i see is this message: "firmware upgrade encountered an issue. please select recovery mode in kies and try again"
How do i fix this? can i fix it? is my phone dead?
Now i tryed to flash with odin even if im not in download mode and it found connection with my phone.
However when i try to flash i get this message in Odin:
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
All threads completed. (succeed 0 / failed 0)
And nothing more happens
Please help me with this.
download gb packackage,factory reset,: and get ur phone in download mode ok manually,and in odin dont put bootlooder,pit or tick re partition and after flash if u c bootloop then hus enter recovery mode and factory reset
What Version did you use before flashing stock ROM? and also state what Stock ROM did you try to flash?
I did have same problem before. what i did is flash the Latest stock ICS with ICS Bootloader.
Via Odin select:
Bootloader: ICS Bootloader
PIT: search correct PIT for your stock ROM
PDA: Latest Stock ICS rom
make sure to untick re-partition.
after flashing, quickly unplug your phone from USB.
if problem exist, try flashing again using Old Bootloader. after a successful boot, charge your phone til full charge then restart the phone.
Hello!
As it says. I'm stuck in Odin3 download mode.
I have a Samsung galaxy tab 10.1 GTP7500 wifi+3g
Previously I've had the Galaxy Task 14 rom installed on my tab but wanted to go back to the old 3.2 (honeycomb?) version of android, which I had before. I had a good experience with the GT 14 and it worked great but wanted to go back to 3.2 to feel the difference of the roms.
Anyway, I did a system restore from my backup in CWM with the expectation of everything going smoothly. But after the system restore I got stuck on the boot screen and waited a couple of hours with out any progress. So I decided to reboot, I entered CWM recovery to clear my caches to see if that would help but it had the same results. After browsing the forums a bit i found 'Overcome's Guide' to re-stock my system. Followed the instructions as told and 110% I did everything right. (Though I suspect that clearing the caches might have something to do with it) But it resulted in me being stuck in 'Odin3 download mode'. I can reboot but, either I will directly enter into download mode or I'm at the selection menu where I can't enter CWM recovery mode.
In download mode is says following
Odin3 Download Mode
(Protocol v2.1)
Reason: No Kernal
Secure Mode: Secure
Check Signature: Check
Custom Binary Downlad: No (0 Count)
Current Binary: Samsung Official
Waitting USB cable...
==> Connected! Press the [Start] of Odin3!!
When I try flashing Overcome_CWM_Recovery_v4.1.1.5.tar
I get this:
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
Which appears to me to be success. System reboots but I end up in download mode again.
Then I tried using the android_fastboot_emmc_full_p4_16G_32G.pit and the P7500OXAKI1_P7500XXKI1_P7500XXKI1_HOME.tar.md5
I get these results:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> P7500OXAKI1_P7500XXKI1_P7500XXKI1_HOME.tar.md5 is invalid.
<OSM> End...
I tried browsing the forums to why the hash value was invalid but didn't find any answer that could enlighten me on that matter.
Also found another post which had a similar problem as mine but in his case there might have been a HDD failure since there was some additional error codes appearing for him. I have yet to see those error codes.
I hope you guys can help me in my dilemma?
Thank you!
Solved the problem. I tried flashing with a stock rom from samsung-updates.com rebooted the tab after ended installation and all worked well.
Hi,
I have the same problem. When you say that you flashed a stock rom... which process did you followed?
Hi all,
Apologies for a newb question. I'm trying to install ice-cream sandwich via Odin, and as far as I can tell I'm doing everything right, but nothing is happening.
Here are the details of my phone currently:
Model Number: GT-I9100
Android version 2.3.3
Baseband version: I910000XXKF1
Kernel version: 2.6.35.7-I9100XWKF3-CL276555 [email protected] #2
Build Number: GINGERBREAD.XWKF3
When I try to update the phone via Kies it tells me that the firmware is "up to date".
I tried to update via Odin using this firmware: I9100XWLP8_I9100OPSLP4_OPS However, after I hit start, I get the following message in Odin, and it stops right there.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP8_I9100OPSLP4_I9100XXLPS_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
Am I using the wrong firmware? May I have potentially left out an important step?
1: restart your PC
2: do not start kies / close it if open
3: put your phone in download mode
4: plug in the USB cable in the motherboard side of the USB socket.
5: start Odin flash
6: after boot using dial code wipe.
Unfortunately I did all that. Anything else I might be missing? Does it matter which Kernel the phone is currently using?
Y dont you try rooting your device and then flash a custom rom via recovery mod
Leonya said:
Unfortunately I did all that. Anything else I might be missing? Does it matter which Kernel the phone is currently using?
Click to expand...
Click to collapse
Check & repeat it again if u've missed one of :
1. Download Intratech Odin v.3 1.85 (*credits to Intratech)
2. Uninstall Kies (coz he hates Odin & I'm not kidding..)
3. Reboot PC
4. Run Odin 1.85
5. Select the rom by clicking (just) PDA button & tick one package & autoreboot (don't even touch pit)
6. Navigate to download mode then Connect ur phone to PC
7. Detected (yellow)
8. Click start
9. If its success it'll be 'pass' & do the phone rebooting..then disconnect from PC.
EDiT :
Btw kernel u've been currently used wasn't matter coz official stock roms will do a system full wipe & format (not include ext mmc) but avoid LPQ5.
Good luck mate..
Sent from my GT-I9100 using xda app-developers app
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data).
Now i cannot reboot my phone and cannot connect it to the PC and Kies.
now how do i install android OS.
rohitmall10 said:
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data).
Now i cannot reboot my phone and cannot connect it to the PC and Kies.
now how do i install android OS.
Click to expand...
Click to collapse
use odin to install your firmware
download odin (search in xda)
download your firmware( go to Samsung updates.com)=(search in google)
disable kies
then open odin
go to download mode on your phone by pressing home+power+ vol down
you will get a screen
press vol up you will go into download mode
connect your phone to pc
odin will show the port you connected
add the file you downloaded to pda in odin
the file normally should be a md5 or tar
then press start
when it finishes it will show pass and your phone will reboot
disconnect your phone and try again to mess it up
thanks
thanks for the help
please tell me something more that how can i upgrade my phone from android 2.3 to higher version.
or something else with my phone to improve its performance.
battery not showing correct status and USB function not working
i have recently factory reset and after which i am getting this problem of battery not showing correct status and USB function not working.
rohitmall10 said:
i have recently factory reset and after which i am getting this problem of battery not showing correct status and USB function not working.
Click to expand...
Click to collapse
how about you recalibrate your battery.... use your phone until its shutdown itself and charge it to 100% again....
rohitmall10 said:
thanks for the help
please tell me something more that how can i upgrade my phone from android 2.3 to higher version.
or something else with my phone to improve its performance.
Click to expand...
Click to collapse
CM 9 is available for ace duos(search on youtube), not so stable
CM 7.2 is also there with different mods(sd card not working, single sim)
for a stable one use A-droid and then flash DW ROM3.5
Samsung gt -s6802 ( sd card formated)
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data). and formated sd card.
as you said in other post
I INSTALLED odin
disabled kies
then I opened odin
odin will showedthe port Iconnected
added the file i downloaded to pda in odin
when I press start
it shows
<OSM> Please wait..
<OSM> S6802DDMA1_S6802ODDLI4_S6802DDMA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
FAIL
PLEASE HELP ME SOLVE THE PROBLEM
baburadhakrishnan said:
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data). and formated sd card.
as you said in other post
I INSTALLED odin
disabled kies
then I opened odin
odin will showedthe port Iconnected
added the file i downloaded to pda in odin
when I press start
it shows
<OSM> Please wait..
<OSM> S6802DDMA1_S6802ODDLI4_S6802DDMA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
FAIL
PLEASE HELP ME SOLVE THE PROBLEM
Click to expand...
Click to collapse
im facing the same problem have you found any solution till now ?