I had on the phone 1600.3013.8107.11502. Then I update to 1600.3015.8107.12070. I did it by the refurbish option in the NCS. One month later i wanted to flash on 1600.3030.8773.12120
When i plug phone, the computer detected it other than ever. I saw Qualcomm CDMA Technologies MSM and removable disk with question about formatting. I clicked cancel but NCS does not detect the phone. My computer couldn't install driver for Qualcomm CDMA Technologies MSM. I tried it on others computers but on all its the same, i can't flash this ****. I was looing for solution on others forums but no one can help with this.
Thx for answers.
You have the Qualcomm bootloader. NCS does not recognize this bootloader. I f you want NCS to recognize your device, you will need the NOKIA DLOAD bootloader. However, the Qualcomm is the unlocked one, so depending on your preferences, you can leave it on the Qualcomm. With the unlocked bootloader (which you have) you will only need an other flashing method. Those can be found on the forums here.
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
i have amlmost same problem, but my phone is dead, when i turn it on it stays ond nokia screen
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
Your cellphone is working?
I downloaded NSS but it doesn't detect my phone
And if i had the Qualcomm bootloader,How do i go in recovery?
just want to make a nand backup for a friend and root his stock phone.
I own a sgs+ with a custom rom of andoid so i'm noob at wp.
thx,
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
If you have this error, please check if the phone restarts in this step or just
stays in Normal mode (windows screen). There are some software versions that
will not respond to the OSBL change command. So just try to flash different
version (via .nb file) and try again.
The other option is the manual restore(hex edit), but its really risky if you don't know
what are you doing.
The problem seems to be caused by version mismatch between the OS and the
baseband firmware. Here the solution and more info.
I also has a problem like: "Are you sure you have development Qcom loader"
when trying to flash rainbow mod FW by lucifer to my lumia 710 using NSS pro v0.48. Does anyone has a same problem with me? all steps that told in http://forum.xda-developers.com/showthread.php?t=1620629 i already been followed. but still i can't flash the FW mod, FYI I already succeed in installing FW with qualcom bootloader before using NSS pro.
Cheers
Hi everybody! I'm new at this forum, i come from xperia x8 forum, and I have problems with custom kernels. I have a xperia Neo V, and I just cant connect the phone in fastboot mode. I'm not sure if it is properly bootloader-unlocked, as in the oficial sony's webpage it said that cdma devices cannot be unlocked (check http://unlockbootloader.sonymobile.com/), and I think that is the standard in Europe isn't it? (I'm from spain). Also, I checked the service menu and it also indicates that the bootloader cannot be unlocked.
Anyway i tried through the testpin-s1 tool method and everything seemed to work fine, i got the output with the two lowercase "r", but not the messages showing the model, software version, custom version, filesystem version and serial number, as said in vimjam's guide (check the post regarding unlock BL here: http://forum.xda-developers.com/showthread.php?t=1409269).
When I try to connect it in fastboot mode it just shows the sony ericsson logo and starts to charge, not showing any blue led. I know that this happens in locked devices, but the two lowecase "r" in s1 tool indicate that it is unlocked, so i dont understand... Can someone tell me if my phone is properly unlocked, or if custom kernels can be flashed connecting the device in flash mode (as it does work for me)? Thanks in advance
Eventhough your bootloader is now unlocked, your fastboot is still locked, you have sim-locked phone and you need to pay to unlock it.
ok, so you mean I have to sim-unlock my phone in adition to bl-unlock to connect it in fastboot mode? can this be done in wotanserver or i have to take it to some tech service?
danygarss said:
ok, so you mean I have to sim-unlock my phone in adition to bl-unlock to connect it in fastboot mode? can this be done in wotanserver or i have to take it to some tech service?
Click to expand...
Click to collapse
Yes, you can use wotanserver.
Madfysh said:
Yes, you can use wotanserver.
Click to expand...
Click to collapse
Hi,I managed to unlock my bootloader using msm7227_semc.cmd method.However when I tried to enter fastboot I couldnt
as my sim was locked.I paid for unlock via S1 tool and now have an unloked phone.However when I identify the phone to check
the status of the bootloader I only get one r "Look For Line RUNNING S1_EROM VER "r8A029" but the loader version has a
R .Is my bootloader still unlocked? I have tried getting into fastboot mode but nothing seems to happen.Can you please guide me?
Thanks for reading .Your reply is much appreciated.
Hi guys,
Here the new NSS version (0.50) that allows sim unlock if your Lumia is rooted (710,800). How to unlock:
1. Make sure all drivers are installed, phone is visible by NSS in Normal, OSBL and NAND mode
2. Make sure you have Qcom loader
3. Plug the phone via USB cable
4. Start NSS, go to Simlocks, WP7, press Unlock
5. Follow on screen instructions
Unlock works for PIN and PUK blocked phones.
Download
Regards, Chris
This is to make my Lumia a SIM free to use any other carrier or just when we need to tap PIN or PUK to unlock sim card?
---------- Post added at 10:09 PM ---------- Previous post was at 09:59 PM ----------
What mean #6?
6. Press unlock again to restore the phone to original
I did unlock, I taped PIN so I need to connect again and change mode do OSBL and press UNLOCK second time?
Hi,
Yes it is to unlock the sim restriction, so the phone can be used on any carrier. Just the guys at MS are on some strange drug, the unlock
code they call - PIN, and the unblock code - PUK.
BR
what do you mean by install all drivers, it wont detect when i just plug into usb (normal mode) but when i am in obsl mode it says "nand disk drive" and it says it cant read device
Bph&co said:
Hi,
Yes it is to unlock the sim restriction, so the phone can be used on any carrier. Just the guys at MS are on some strange drug, the unlock
code they call - PIN, and the unblock code - PUK.
BR
Click to expand...
Click to collapse
Bph&co said:
Hi,
Yes it is to unlock the sim restriction, so the phone can be used on any carrier. Just the guys at MS are on some strange drug, the unlock
code they call - PIN, and the unblock code - PUK.
BR
Click to expand...
Click to collapse
But still need connect again and press unlock second time?
fivesevenn said:
what do you mean by install all drivers, it wont detect when i just plug into usb (normal mode) but when i am in obsl mode it says "nand disk drive" and it says it cant read device
Click to expand...
Click to collapse
There are few drivers needed - Zune, Nokia Care Suite, Microsoft USB disk drivers. Make sure Zune and NCS are installed and working.
djtonka said:
But still need connect again and press unlock second time?
Click to expand...
Click to collapse
Second time is not needed. It is just restores the baseband firmware to original.
I've been trying to sim unlock my phone all day, but I keep on getting this:
Looking for phone...Done.
IMEI:
Changing phone mode...Done.
----------------------------------------------------------------------------
Looking for NAND disk...Not found.
Things to check:
1. Is the phone connected?(Plug to the USB)
2. Is it in the correct mode?(Try to switch to OSBL mode)
3. Have you installed the Qcom loader ?(Use the Install button)
in windows xp its not work?
I used NSS the other day on my DLOAD and to my surprise it magically unlocked just by pressing detect. I was over the moon! Saved me moneyyy!
monstercable said:
I've been trying to sim unlock my phone all day, but I keep on getting this:
Looking for phone...Done.
IMEI:
Changing phone mode...Done.
----------------------------------------------------------------------------
Looking for NAND disk...Not found.
Things to check:
1. Is the phone connected?(Plug to the USB)
2. Is it in the correct mode?(Try to switch to OSBL mode)
3. Have you installed the Qcom loader ?(Use the Install button)
Click to expand...
Click to collapse
Hi,
When the phone restarts after the change to OSBL mode command, does it stay with dark screen,
or just enters the long boot process and comes in Normal Mode ?
If the latter, you maybe have baseband/ROM mismatch, where some commands are not recognized -
e.g. the restart. Battery level is also not read correct. The solution is to restore to Nokia loader (only on 710)
and flash some version to make sure ROM and baseband files are matched, then install QCOM and do
the sim unlock procedure.
BR
Bph&co said:
Hi,
When the phone restarts after the change to OSBL mode command, does it stay with dark screen,
or just enters the long boot process and comes in Normal Mode ?
If the latter, you maybe have baseband/ROM mismatch, where some commands are not recognized -
e.g. the restart. Battery level is also not read correct. The solution is to restore to Nokia loader (only on 710)
and flash some version to make sure ROM and baseband files are matched, then install QCOM and do
the sim unlock procedure.
BR
Click to expand...
Click to collapse
Yes I dont think the battery is correct either...I have the 710 so how do i restore to nokia loader?
monstercable said:
Yes I dont think the battery is correct either...I have the 710 so how do i restore to nokia loader?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1620629
Will this work for any carrier or only for the common ones? I have T-Mobile UK and they have this new lock with Orange UK...
Bph&co said:
Hi guys,
Here the new NSS version (0.50) that allows sim unlock if your Lumia is rooted (710,800). How to unlock:
1. Make sure all drivers are installed, phone is visible by NSS in Normal, OSBL and NAND mode
2. Make sure you have Qcom loader
3. Plug the phone via USB cable
4. Start NSS, go to Simlocks, WP7, press Unlock
5. Follow on screen instructions
Unlock works for PIN and PUK blocked phones.
Download
Regards, Chris
Click to expand...
Click to collapse
hey man you are a genius! i have been digging up and trying to find a sim unlock solution since i bought this phone and to no avail. i happened to buy an unlock code for my lumia 710 so i am unable to test your solution to see if it works. i wish you had revealed this method earlier so i would have donated the money to you instead! i am waiting to see if people were successful with your method. for my knowledge though...does it have anything to do with sdb5 partition? thanks again and good luck!
For lumia800?
Sent from my Lumia800 using XDA Windows Phone 7 App
Deeco7 said:
I used NSS the other day on my DLOAD and to my surprise it magically unlocked just by pressing detect. I was over the moon! Saved me moneyyy!
Click to expand...
Click to collapse
Hi, in another post you pointed out that your phone was DLOAD and you flashed a generic firmware to your phone which gave you Qualcomm in NSS, could you please give more information on this, which firmware etc. so hopefully it'll work for us too.
/edit - Weird this. If I restart my phone with Vol up then insert USB (till buzz) and then click Detect on NSS it jumps straight to OSBL Mode - WP7 Qualcomm, I can't do anything with it at this stage so maybe (hopefully) someone will have an idea?
dgwebb said:
Hi, in another post you pointed out that your phone was DLOAD and you flashed a generic firmware to your phone which gave you Qualcomm in NSS, could you please give more information on this, which firmware etc. so hopefully it'll work for us too.
/edit - Weird this. If I restart my phone with Vol up then insert USB (till buzz) and then click Detect on NSS it jumps straight to OSBL Mode - WP7 Qualcomm, I can't do anything with it at this stage so maybe (hopefully) someone will have an idea?
Click to expand...
Click to collapse
That's exactly what I did, and when I pressed 'Detect' my sim unlocked. Try putting a different sim in . But, I want to know what bootloader have due to the confusion of NSS detecting my phone as 'WP7 Qualcomm'.
Deeco7 said:
That's exactly what I did, and when I pressed 'Detect' my sim unlocked. Try putting a different sim in . But, I want to know what bootloader have due to the confusion of NSS detecting my phone as 'WP7 Qualcomm'.
Click to expand...
Click to collapse
Just detect on it's own shouldn't unlock it, you'd need to press the unlock button wouldn't you? In settings/About it should say bootloader version, mine is 7.35.0.0. I currently have a vodaphone sim in my phone (locked to Orange) and it doesn't unlock so it's trying to get to the bottom of how yours managed to unlock as qualcomm. Which drivers do you have installed for instance?
deylo said:
...does it have anything to do with sdb5 partition? thanks again and good luck!
Click to expand...
Click to collapse
Hi,
If you have a phone, check what the Simlock saves as backup. Also after unlock you can try the Restore button and see what is loaded.
BR
Hi,
I've been trying to unlock my Lumia 710 from wind and I'm having a few problems.
What I've done.
- I have QUALCOMM bootloader, since I get the format disk popup in windows.
- Flashed WP Rainbow Mod 7.8 Custom Rom: http://forum.xda-developers.com/showthread.php?t=1654415 using Nokia Lumia 710 Downloader (http://forum.xda-developers.com/showthread.php?t=1665821)
- Installed Zune (I guess drivers as well), Nokia Care Suite (WinUSB Drivers for x64), QUALCOMM Drivers (http://forum.xda-developers.com/showthread.php?t=1669498)
- Downloaded NssPro v0.52
- Followed this tutorial to set-up NssPro for WP7: http://forum.xda-developers.com/showthread.php?t=1721355
What's wrong
- When running NssPro, using the detect button the program says phone not found (yes, its in OSBL mode.), and if I click out I get a pop up saying Nokia Care Suite stopped responding and the program crashes.
Images:
- Phone not Found: http://i.imgur.com/bmcAI.png
- Crashed: http://i.imgur.com/j4Efn.png
I'm running Windows 8 x64.
If anyone could point out what I'm doing wrong would be great.
Thanks,
Karn.
I have your same problem and posted here a question but no one answer me
i hope some one can help us
mine was a orange brand lumia
now i have a raimbow mod
finally i figure out
the problem is on QUALCOMM Drivers
you don't have to install notting just put inside nss pro the correct driver
i don't know if i can post files or other
if cannot send me a pm and i send you a link
i successfull sim unlocked my 710 but now even if
i have network coverage when i try to call it disconnect the call
Hey,
Could you explain this to me in detail.
Thanks.
Ariakan said:
finally i figure out
the problem is on QUALCOMM Drivers
you don't have to install notting just put inside nss pro the correct driver
i don't know if i can post files or other
if cannot send me a pm and i send you a link
i successfull sim unlocked my 710 but now even if
i have network coverage when i try to call it disconnect the call
Click to expand...
Click to collapse
run it in administrator mode and compatibility windows 7.
Hi,
recently i found my dad's old Nokia Lumia 710 and i want to custom rom it. I searched like entire XDA, but every link to qualcomm bootloader is deleted.
If you have a nokia 710 qualcomm bootloader, please send it here.
Regards.
SzymonDevs said:
Hi,
recently i found my dad's old Nokia Lumia 710 and i want to custom rom it. I searched like entire XDA, but every link to qualcomm bootloader is deleted.
If you have a nokia 710 qualcomm bootloader, please send it here.
Regards.
Click to expand...
Click to collapse
Nokia Lumia 710 - A Layman's guide to install CUSTOM ROM
For those who already have a QUALCOMM BOOTLOADER 1. Enter OSBL MODE. WARNING: IF YOU GET FORMAT DISK MESSAGE IN WINDOWS - ALWAYS CLICK CANCEL. 2.Switch off the phone. 3. Press Volume UP and Power Key and wait for the short buzz abd release...
forum.xda-developers.com
Try this.
TheWorldYT said:
Nokia Lumia 710 - A Layman's guide to install CUSTOM ROM
For those who already have a QUALCOMM BOOTLOADER 1. Enter OSBL MODE. WARNING: IF YOU GET FORMAT DISK MESSAGE IN WINDOWS - ALWAYS CLICK CANCEL. 2.Switch off the phone. 3. Press Volume UP and Power Key and wait for the short buzz abd release...
forum.xda-developers.com
Try this.
Click to expand...
Click to collapse
It says "The file link that you requested is not valid"