hi , all i have a problem, i'm desesperate when flash my SGS2 with 4.1.2 rom i have a error status 7 in CWM but i delete 3 lines in update-scrip , i read that help to solve this problem, and i flash without problem but now when i power on the phone it become stuck on the S loading screen , I can entry in boot loader mode but not in recovery what can i do can i flash one official rom via odin or something please help
This is general, you should ask in q and a but ok. I think you can access to download mode(boot mode?)try to flash cm kernel. Or different kernel and try to reboot you phone in recovery mode.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
joloxx9joloxx9 said:
This is general, you should ask in q and a but ok. I think you can access to download mode(boot mode?)try to flash cm kernel. Or different kernel and try to reboot you phone in recovery mode.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
Click to expand...
Click to collapse
im sorry i dont know that I must post in Q&a , ok, I flash latest CM10 boot.img and flash the ROM (CM10) and it work thank you so much, I really apreciated =)=) ssorry about the inconvenience
Related
sorry about this noob question..
i want to flash xkernel in my ray using flashtools, everything ok, 0 bad block..
but, when turn on my ray, it just stuck in xkernel logo or it will boot again..
i used ics stock rom and i have unlocked bootloader..
i also try flashing lupus, ctcaer, but the problem are same.. stuck in logo or booting again..
but when i ty flykernel, it can boot normally
help me because i want try xkernel..
thanks in advance and sorry for my english
AW: [Q] problem sirkay xkernel st18i
kurokuroninja said:
sorry about this noob question..
i want to flash xkernel in my ray using flashtools, everything ok, 0 bad block..
but, when turn on my ray, it just stuck in xkernel logo or it will boot again..
i used ics stock rom and i have unlocked bootloader..
i also try flashing lupus, ctcaer, but the problem are same.. stuck in logo or booting again..
but when i ty flykernel, it can boot normally
help me because i want try xkernel..
thanks in advance and sorry for my english
Click to expand...
Click to collapse
you have flashed a kernel which is not compatible with the rom (means you maybe flashed a jb kernel on a ics rom or something like this). be sure that your kernel is for stock ics..read the first posts of the thread from the kernel you want to use.
sometimes u need a full wipe to work with new kernel
rob rich said:
you have flashed a kernel which is not compatible with the rom (means you maybe flashed a jb kernel on a ics rom or something like this). be sure that your kernel is for stock ics..read the first posts of the thread from the kernel you want to use.
Click to expand...
Click to collapse
I'm using iced bean rom and try flashing xkernel v9.587d..
does it compatible?
always stuck in xkernel logo when booting or reboot again..
RavinduSha said:
sometimes u need a full wipe to work with new kernel
Click to expand...
Click to collapse
thanks, i will try it
kurokuroninja said:
I'm using iced bean rom and try flashing xkernel v9.587d..
does it compatible?
always stuck in xkernel logo when booting or reboot again..
thanks, i will try it
Click to expand...
Click to collapse
Flash 9.587c kernel...
This is working for me...
Press thnx if I helped.
Sent from my ST18i
I have a problem with overclock stock android (20h). Of course I rooted my phone and after it I installed busybox (xbin). On terminal console I have "exec format" error. Before 20h I had 20c and everything worked fine.
Wysłane z mojego LG-P760 za pomocą Tapatalk 4
Sorry, wrong message!
Xerdox said:
I have a problem with overclock stock android (20h). Of course I rooted my phone and after it I installed busybox (xbin). On terminal console I have "exec format" error. Before 20h I had 20c and everything worked fine.
Wysłane z mojego LG-P760 za pomocą Tapatalk 4
Click to expand...
Click to collapse
I have this same problem.I tested all the modules present on the forum for OC
every time the same error I have "exec format error'
Does anyone have any solution to the problem?
LG updated kernel. Before 20h it was (3.0.31), but after 20h update everyone has (3.0.31-00002-ge3c15f3).
Xerdox said:
I have a problem with overclock stock android (20h). Of course I rooted my phone and after it I installed busybox (xbin). On terminal console I have "exec format" error. Before 20h I had 20c and everything worked fine.
Wysłane z mojego LG-P760 za pomocą Tapatalk 4
Click to expand...
Click to collapse
just flash back the stock recovery im on v20h with 3.0.31 kernel and overclock works good =p
what do you mean? just with the upgrade rom 20H changed the kernel to 3.0.31-00002-ge3c15f3 and I had 3.0.31. I changed only by KDZ rom for 20h and updated the kernel itself. I have to restore all of the software to stock rom Poland Orange and manually upload 20h?
I had previously 20C: 3.0.31. after update rom to KDZ: 20H changed kernel :3.0.31-00002-ge3c15f3
UPDATE OVERCLOCK working. i go back to kernel 3.0.31 (lock BL) and every working fine
Heyyy, so i just came back to android and felt like flashing some kitkat roms so as to enjoy those cool features kitkat offers..i'm currently running stock 4.1.2 JB.
as far as im concerned, first i should flash a rooted+cwm kernel through odin (which i flashed latest siyah for JB)... that went smooth and i got rooted and got cwm, problem is when i want to actually install any rom... I continually get "installation aborted" and the only way to make my phone usable again is to flash a stock firmware through odin.
any ideas ? thanks !
PD: I tried installing the "kitkat cwm compatible" thingy both through odin and through cwm, it did flash correctly, but phone fails to boot. if you dont get this last thing.. its this: http://forum.xda-developers.com/showthread.php?t=2546597
hope anyone out there can give me a hand since im tired of running stock :'(
check the OP again
have you read the OP before flashing KK custom rom. maybe u miss some part to flash it.
You can flash philz kernel on to of your stock JB to get root and recovery (no need to use Odin, you can flash through standard recovery). Then do a backup of your rom and after that flash a cwm-recovery >6.0.4.x (this is needed to be able to install s KitKat ROM). Boot directly after flashing into that recovery, wipe system and data and install KitKat.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
You can flash philz kernel on to of your stock JB to get root and recovery (no need to use Odin, you can flash through standard recovery). Then do a backup of your rom and after that flash a cwm-recovery >6.0.4.x (this is needed to be able to install s KitKat ROM). Boot directly after flashing into that recovery, wipe system and data and install KitKat.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the info, i went to the philz kernel thread but i cannot seem to know which file should i download, he says i should look at the kernel code or something like that but i fail to find such thing, any idea ? pleasee. thanks
Poroto said:
Thanks for the info, i went to the philz kernel thread but i cannot seem to know which file should i download, he says i should look at the kernel code or something like that but i fail to find such thing, any idea ? pleasee. thanks
Click to expand...
Click to collapse
Look in settings - about phone (or take a screenshot and post it here)
Christiaan91 said:
Look in settings - about phone (or take a screenshot and post it here)
Click to expand...
Click to collapse
There goes the screenshot! Thanks!
Poroto said:
There goes the screenshot! Thanks!
Click to expand...
Click to collapse
I've got more information there.
Do you know what firmware you installed?
Or you can flash dorimanx kernel through Odin. It also gives you root access. Download this:
Kernel_Dorimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
If you don't know how to flash it through Odin, look in the op of the dorimanx kernel thread. Just above the download links it's explained.
After that follow the instructions from AndDiSa by flashing a kitkat compatible cwm etc.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
I've got more information there.
Do you know what firmware you installed?
Or you can flash dorimanx kernel through Odin. It also gives you root access. Download this:
Kernel_Dorimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
If you don't know how to flash it through Odin, look in the op of the dorimanx kernel thread. Just above the download links it's explained.
After that follow the instructions from AndDiSa by flashing a kitkat compatible cwm etc.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
i did that and now im running kitkat resurrection remix ! thanks a bunch !!
Solved .
Poroto said:
i did that and now im running kitkat resurrection remix ! thanks a bunch !!
Solved .
Click to expand...
Click to collapse
Good to hear. Please add [SOLVED] to the thread title.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
Good to hear. Please add [SOLVED] to the thread title.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
Done.
hi
tired to flash other roms i flashed cm12 unofficial but when i turn on phone and press the power butten it will reboot:|
the message app always stops
and the music app too
wifi not working
and...
i want to fix wifi problem to update it with cyanogenmod ota updates
what should i do?
These problems may are bugs of your ROM? Which ROM are you using? I recommend this one:
http://forum.xda-developers.com/gal...ives/rom-cyanogenmod-12-t2955551/post57100306
Gesendet von meinem GT-I9100 mit Hilfe von XDA Forums Pro.
THX for your response
but when i connet device to odin via downloadmod odin not reconized it
and this rom does not have a recovery!
so iwant a way to fix the wifi problem and update it via ota
Some more experienced users say installing another kernel might help, because WiFi drivers are included in kernel... But difficult without Odin... Perhaps check out the thread about Odin connection problems:
http://forum.xda-developers.com/showthread.php?p=43132016
Or try the Flashify app or Mobile Odin from Play Store for flashing another kernel. Hope this helps. I'm not a pro, but better any answer than no one
Gesendet von meinem GT-I9100 mit Hilfe von XDA Forums Pro.
wich kernel do you think is best
I can't especially recommend one, because I didn't install one yet. But search for Dorinmanx or Gustavo's kernel. Those are the most used kernels I think.
Gesendet von meinem GT-I9100 mit Hilfe von XDA Forums Pro.
thx
now i want back to the stock rom
what should i do?
Sepehr619 said:
thx
now i want back to the stock rom
what should i do?
Click to expand...
Click to collapse
If you want to go back to stock rom, you will have to download the stock rom if you haven't already from sammobile or any other similar website. You will have to flash the file with ODIN then factory reset. (You can brick your device if you have brickbug affected chip and unpatched rom like some ICS firmwares, 4.1.2JB is the android version you want to downgrade to).
gsstudios said:
If you want to go back to stock rom, you will have to download the stock rom if you haven't already from sammobile or any other similar website. You will have to flash the file with ODIN then factory reset. (You can brick your device if you have brickbug affected chip and unpatched rom like some ICS firmwares, 4.1.2JB is the android version you want to downgrade to).
Click to expand...
Click to collapse
thx for your response
i know how to do it
my problem is odin not recognizing my phone in download mod
what should i do
I think there's no other way than flashing another kernel, for example with Flashify. Most kernels also include a recovery. Then it is simple to flash the stock ROM via recovery (if you have the ROM as a zip file).
Hope this helps.
Gesendet von meinem GT-I9100
BenjyTec said:
I think there's no other way than flashing another kernel, for example with Flashify. Most kernels also include a recovery. Then it is simple to flash the stock ROM via recovery (if you have the ROM as a zip file).
Hope this helps.
Gesendet von meinem GT-I9100
Click to expand...
Click to collapse
thx for you response
i flashe this:
http://forum.xda-developers.com/gal...d-12s-os12-t3089916/post62094237#post62094237
wifi works in the first boot
but after a reboot wifi not works
Hello XDA.
I have a question.
If i root my Pocophone F1 can i still update my system to the latest versions that get released?
Yes you can, but you will have to root it again and have install twrp and fde
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
uremytoy said:
Yes you can, but you will have to root it again and have install twrp and fde
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Click to expand...
Click to collapse
that is annoying. so it is not really worth it rooting now i guess? since there are alot of bugfixing updates comming and android 9
Robii97 said:
that is annoying. so it is not really worth it rooting now i guess? since there are alot of bugfixing updates comming and android 9
Click to expand...
Click to collapse
Why not just flash magisk
Oh and FYI everytime you flash a rom / update it turns in to stock atleast all the system changes.
Skickat från min POCOPHONE F1 via Tapatalk
Zeggi said:
Why not just flash magisk
Oh and FYI everytime you flash a rom / update it turns in to stock atleast all the system changes.
Skickat från min POCOPHONE F1 via Tapatalk
Click to expand...
Click to collapse
why is that? I've never seen any other device that I've used (Non xiaomi devices, don't know if its a xiaomi thing) return to stock recovery after flashing a ROM. Is it a TWRP bug? If so, I'm waiting for a bug fix.
kishore1998 said:
why is that? I've never seen any other device that I've used (Non xiaomi devices, don't know if its a xiaomi thing) return to stock recovery after flashing a ROM. Is it a TWRP bug? If so, I'm waiting for a bug fix.
Click to expand...
Click to collapse
No you misunderstood me.
I'm not saying recovery partition turns to stock
The system it self, if the rom doesn't have root in it self as is it won't be included. Also when you flash which ever rom, even Samsung for example root disappears the app supersu is still there but you need to run it and let it do its own work to get root back again right.
I'm just saying when ever you install new rom on xiaomi phones and basically any phone root is inactive until you run the app again
No bug, oh and twrp is unofficial that's why encryption isn't working for data partition.
No bugs it's just how it is.
Skickat från min POCOPHONE F1 via Tapatalk
Zeggi said:
No you misunderstood me.
I'm not saying recovery partition turns to stock
The system it self, if the rom doesn't have root in it self as is it won't be included. Also when you flash which ever rom, even Samsung for example root disappears the app supersu is still there but you need to run it and let it do its own work to get root back again right.
I'm just saying when ever you install new rom on xiaomi phones and basically any phone root is inactive until you run the app again
No bug, oh and twrp is unofficial that's why encryption isn't working for data partition.
No bugs it's just how it is.
Skickat från min POCOPHONE F1 via Tapatalk
Click to expand...
Click to collapse
Yeah, I know that root is removed when a ROM is flashed. What I was saying was from my own experience flashing miui 9&10. The recovery goes back to stock. Do you know why that happens? Is there some step that I missed?
kishore1998 said:
Yeah, I know that root is removed when a ROM is flashed. What I was saying was from my own experience flashing miui 9&10. The recovery goes back to stock. Do you know why that happens? Is there some step that I missed?
Click to expand...
Click to collapse
If you are installing official updates of rom, like weekly or global version from xiaomi and not a custom rom. What other result did you expect?
If you are, Im not sure anymore but if you at this moment have stock Rom with twrp only and when a new version is released of stock Rom.... Than yes of course the system will be restored since it's stock recovery will be replaced to stock. Not a bug it's commen sense since you are updating to stock which doesn't contain twrp.
If you are using other rom that doesn't flash over /recovery partition, well then that is another story
Skickat från min POCOPHONE F1 via Tapatalk
Zeggi said:
If you are installing official updates of rom, like weekly or global version from xiaomi and not a custom rom. What other result did you expect?
If you are, Im not sure anymore but if you at this moment have stock Rom with twrp only and when a new version is released of stock Rom.... Than yes of course the system will be restored since it's stock recovery will be replaced to stock. Not a bug it's commen sense since you are updating to stock which doesn't contain twrp.
If you are using other rom that doesn't flash over /recovery partition, well then that is another story
Skickat från min POCOPHONE F1 via Tapatalk
Click to expand...
Click to collapse
Oh okay. Maybe I must have been confused and flashed the official instead of the xiaomi.eu version
How about start reading guides. After flashing ROM you have to flash fde zip otherwise your twrp will be replaced with stock recovery. That's the reason why you have to flash it. If you flash that zip you will still have twrp after flashing miui ROM @Zeggi you are wrong
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
uremytoy said:
How about start reading guides. After flashing ROM you have to flash fde zip otherwise your twrp will be replaced with stock recovery. That's the reason why you have to flash it. If you flash that zip you will still have twrp after flashing miui ROM @Zeggi you are wrong
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Click to expand...
Click to collapse
Actually, what the fde does is disables encryption of /data partition.
Twrp is under /recovery partition.
And also I did a test yesterday by restoring my f1 to stock and verified that I didn't have to flash fde and after that I did reset in twrp and flashed fde v2 with magisk which worked also.
Big difference I noticed with fde v2 flashed was that the first boot was very slow and sluggish but after reboot it solved the slow speeds. Other than that I noticed vanced YouTube module in magisk worked for me, before when I hadn't flashed fde vanced YouTube crashed all the time so sure I benefited something out of flashing fde
Skickat från min POCOPHONE F1 via Tapatalk