Was my photon 2.3.5 which died of electrify sbf install to revive him but then I noticed that when taking a picture to call or listening to music reincia I could not find the solution to this problem. can be used but only restarts.
Flash this give you back stock 2.3.5
http://www.mediafire.com/?hji3s79s8cs14c6
Sent from my MB855 running AT&T using xda app-developers app
correct odungri
excuse my ignorance but how I can install the stock a photon, since I am new to android.
patasolientes said:
excuse my ignorance but how I can install the stock a photon, since I am new to android.
Click to expand...
Click to collapse
download rsd lite, then download the sbf, turn your phone off and then hold the vol down button and press the power button. Next you'll see press the vol button down until you see rsd at the top of the screen then press the vol up button. Plug your phone up to the computer. Open up rsd lite and find the sbf file and click start.
Related
Help.
I think i bricked my photon.
I flash it using RSDLite. When entering BP Passtrought status, its failed.
And now it stuck on motorola screen. Can not enter RSD protokol or Fashboot. Just stuck on motorola screen.
I i can do, or its hardbrick and can not be revive ?
What have you done to uour phone?
flashed 2.3.5? pull the battery and put it back. Then press volumn up and power button at the same time. See if it can boot into rsd mode , if can't, I.m sorry.
Sent from my MB855 using XDA App
dxl880517 said:
What have you done to uour phone?
flashed 2.3.5? pull the battery and put it back. Then press volumn up and power button at the same time. See if it can boot into rsd mode , if can't, I.m sorry.
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I flash 198_7 because mine 198_6.
Trying pull and put battery, at first no hope.
Then i try connect to my PC, try to enter RSD protocol, and yes, it can enter RSD protocol again. I think it failed when on BP Passtrought because cannot detect driver.
Second try to flash it, it work.
Thanks for help.
I'm stuck.
I cant get into RSD mode cause when I hold vol up it just goes into fastboot.
IF I vol down it just blinks and turns off...
What are my options.
Pull the battery then try to boot it normally, after a minute or so it goes into rsd mode
Sent from my DROID X2 using xda premium
Do you know how to go into android recovery and do a factory reset?
KurioHonoo said:
Pull the battery then try to boot it normally, after a minute or so it goes into rsd mode
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Its just sitting at "Failed to boot 1"
bijan588 said:
Its just sitting at "Failed to boot 1"
Click to expand...
Click to collapse
Try pulling the battery and put it back in with the phone off plug in your wall charger and see if your recovery comes up
What were u trying to do before this happened?
*****Have u tried a fully charged battery?*****
failed to boot = sbf time
no big deal
skwoodwiva said:
failed to boot = sbf time
no big deal
Click to expand...
Click to collapse
U can't sbf if u can't start rsd protocol
my bad
wow do we have a real one?
if I remember well it would always say failed to boot 2 and rsd would be available .
Is this a Dx2?
Apparently he is getting a failed to boot 1 ..I think I remember seeing this before.
It might be in one of the.older sbf tutorial threads...myabe the one by dag425.
It would be helpful (maybe) to know what was being done that caused this to happen.
Hopefully he wasn't messing with bootloader partitions and signatures or something. I think that would he just about the only thing that could hard brick us.
Sent from my DROID X2 using XDA App
Could it just be hardware failure?
We wont know anything til the OP comes back and give more info on situation
Going back to the original post... Since when did we hold volume up to get to android recovery??? Pressing up selects the option thats on the screen...
from my X2 roaming the north
LordRalh3 said:
Going back to the original post... Since when did we hold volume up to get to android recovery??? Pressing up selects the option thats on the screen...
from my X2 roaming the north
Click to expand...
Click to collapse
I'm assuming he meant power+up.
Sent from my MB870 using xda premium
If u hold power and volume up it takes u directly into "starting RSD protocol "
it is the method I have ALWAYS used when flashing sbf
I am stuck here too! I only have two options:
1: fastboot
or
2: nvflash
I have no idea what the hell eather one does so any little help is greatly appreciated for this noob. Thanks in advance...
So I take it yours says "failed to boot 1" also?
Is this Dx2 or mx2?
And you are familiar w/ booting menu: pwr on wait 1/2 (or less) sec then vol down and keep selecting w/ vol dn then vol up to select . Rsd is last.
IDNK WHAT BUT A REAL BRICK!
skwoodwiva said:
So I take it yours says "failed to boot 1" also?
Is this Dx2 or mx2?
And you are familiar w/ booting menu: pwr on wait 1/2 (or less) sec then vol down and keep selecting w/ vol dn then vol up to select . Rsd is last.
IDNK WHAT BUT A REAL BRICK!
Click to expand...
Click to collapse
yeah thats what i used to get to android recovery and rsd protocol and stuff. this time i can only do fastboot and nvflash. i am also stuck at the failed to boot 1 on boot. Also, it will only turn on when connected to pc/wallcharger...thank you for helping as my problem is the exact same as his. any more info needed just ask. i will try to reply quickly and fix this for both of us
Edit: this is dx2
trevsl
I don't know how to help but what exactly did you do to get the FTB 1?
skwoodwiva said:
trevsl
I don't know how to help but what exactly did you do to get the FTB 1?
Click to expand...
Click to collapse
was messing with settings in BSR idk what it was:
eather
1. clean boot files or whatever
or
2. partition sd card
i think it was the partition sd card part. cuz after that the option to go back went away...very odd. did a batt pull and then got failed to boot 1. i think im gonna have to take it to vzw and hope the guys an idiot
I need the fastboot files to fix my buddies phone, & all the links don't work can anyone help me please
Are you trying to sbf?
Sent from my DROID X2 using xda premium
i'm trying to restore the phone it will only boot to the fastboot screen after a bad kernel install, this is my first time messing with a phone that has fastboot what do i do ?
Use volume down
Dee Ex Two - See Em Seven
can't get to recovery, as soon as i push down on the volume the screen goes black ?
jaaydogg said:
can't get to recovery, as soon as i push down on the volume the screen goes black ?
Click to expand...
Click to collapse
Have you tried pressing VolUp , or both at the same time, or pressing the power button?
I think pressing them both or power will activate fastboot.
I realise that you asked for links to the fastboot files...but for sbfing:
Try these instructions http://www.droidxforums.com/forum/droid-x2-support/37159-guide-how-sbf-x2.html
Links to the files:
RSDlite 5.3.1 and 5.1 Windows 64bit and 32bit zip
Droid X2 Gingerbread 2.3.4 Motorola SBF zip file
key instructions at step #10:
With the X2 in a completely POWERED DOWN state, press and hold the volume up button on the top right hand side of the phone. While still holding the volume up press and hold the power button until the screen turns on. At the top of the screen you should see "Starting RSD protocol support" once this text appears you may release the volume up button.
Click to expand...
Click to collapse
This should completely revert the X2 back to factory 2.3.4...(I have done this myself) and I believe this is the way they would do it at the factory.
http://forum.xda-developers.com/showthread.php?t=1466630
Thanks everybody for the help got the phone fixed & my friend is happy now
Request to have thread moved to Q&A
Dee Ex Two - See Em Seven
i have a droid razr and it was used on pageplus network and i am wanting to sell it, what do i need to do to get it back to verizon settings, the phone is rooted and on stock rom.
vk4559 said:
i have a droid razr and it was used on pageplus network and i am wanting to sell it, what do i need to do to get it back to verizon settings, the phone is rooted and on stock rom.
Click to expand...
Click to collapse
As far as I know.. just reflash it with Verizon's crap..lol
Does it really matter where from? I replied‚ didn't I?
vk4559 said:
i have a droid razr and it was used on pageplus network and i am wanting to sell it, what do i need to do to get it back to verizon settings, the phone is rooted and on stock rom.
Click to expand...
Click to collapse
Use your computer and download RSDLite, make sure you have the motorola drivers installed too. Then download the Verizon firmware from here: http://sbf.droid-developers.org/
Once you have all that set up.
Turn off the phone
Then press the power button, volume up button, and volume down button all at the same time
This will bring up a menu
Scroll down using the down volume key and highlight AP Fastboot
Select AP Fastboot using the volume up key
Plug your phone into the computer using a cable
Open RSDLite
Press the three dots (...) to locate the Verizon Firmware you downloaded
Press Unzip and flash
THIS WILL ERASE EVERYTHING ON THE PHONE
Hi, I just started flashing for the first time.
I first did a root using EternityProject EasyRootICS v1.5.
Then I installed recovery Razr ClockWorkMod Touch 5.8.4.5 Black Edition and made a backup.
Then I flashed this rom ([ROM][4.4.4][AOSP][CDMA/GSM][Unofficial] SlimKat)
I did a clean install and after pressing reboot, it stays a blank screen. When I disconnect my USB, I hear the sound of a device disconnecting vice versa meaning my phone is still working??
My previous android was running 4.0.4.
Please help?
cheaterbug said:
Hi, I just started flashing for the first time.
I first did a root using EternityProject EasyRootICS v1.5.
Then I installed recovery Razr ClockWorkMod Touch 5.8.4.5 Black Edition and made a backup.
Then I flashed this rom ([ROM][4.4.4][AOSP][CDMA/GSM][Unofficial] SlimKat)
I did a clean install and after pressing reboot, it stays a blank screen. When I disconnect my USB, I hear the sound of a device disconnecting vice versa meaning my phone is still working??
My previous android was running 4.0.4.
Please help?
Click to expand...
Click to collapse
I've tried holding the power button and volume down button. It manages to restart and I see my motorolo logo, and once it finishes loading, it goes back to blank screen again. My computer registers the device connected as it plays the sound, but the screen is still blank! Any help please?
cheaterbug said:
Hi, I just started flashing for the first time.
I first did a root using EternityProject EasyRootICS v1.5.
Then I installed recovery Razr ClockWorkMod Touch 5.8.4.5 Black Edition and made a backup.
Then I flashed this rom ([ROM][4.4.4][AOSP][CDMA/GSM][Unofficial] SlimKat)
I did a clean install and after pressing reboot, it stays a blank screen. When I disconnect my USB, I hear the sound of a device disconnecting vice versa meaning my phone is still working??
My previous android was running 4.0.4.
Please help?
Click to expand...
Click to collapse
You shouldn't install CWM,you must install Safestrap or BootMenuManager.
I suggest you to go back to stock with RSD Lite and start over.
Sent from my Razr XT910
welder73 said:
You shouldn't install CWM,you must install Safestrap or BootMenuManager.
I suggest you to go back to stock with RSD Lite and start over.
Sent from my Razr XT910
Click to expand...
Click to collapse
OMG Thanks for your reply! I've just looked into RSD Lite and I can't power off my phone... It is actually on, and when i press power and volume down, it restarts it! What do I do to enter RDS Lite?
Ok, I got it by holding power and volume down, and once it blacks out, let go of power button and hold volume up button..
Now onto RDS Lite, it's saying failed flashing process. 1/24 flash cdt.bin_signed -> Phone returned failed
cheaterbug said:
OMG Thanks for your reply! I've just looked into RSD Lite and I can't power off my phone... It is actually on, and when i press power and volume down, it restarts it! What do I do to enter RDS Lite?
Click to expand...
Click to collapse
Shut it down and immediately press vol- vol + and power button.
Then with vol- button scroll to AP Fastboot mode and select it with vol+ button
Sent from my Razr XT910
welder73 said:
Shut it down and immediately press vol- vol + and power button.
Then with vol- button scroll to AP Fastboot mode and select it with vol+ button
Sent from my Razr XT910
Click to expand...
Click to collapse
welder73!! Please don't leave me!!
I have already passed that step... Now RSD Lite is failing for me... Can you help me please? I'll tell you what is happening..
cheaterbug said:
welder73!! Please don't leave me!!
I have already passed that step... Now RSD Lite is failing for me... Can you help me please? I'll tell you what is happening..
Click to expand...
Click to collapse
Which fastboot file you trying to flash? What is your region?
Sent from my Razr XT910
welder73 said:
Which fastboot file you trying to flash? What is your region?
Sent from my Razr XT910
Click to expand...
Click to collapse
They are limiting how many messages I can post, only 1 post every 5 minutes!
My fast boot file I used is Blur_Version.982.124.18.XT910.Fido.en.CA. Is it alright if the phone was bought from Malaysia?
cheaterbug said:
They are limiting how many messages I can post, only 1 post every 5 minutes!
My fast boot file I used is Blur_Version.982.124.18.XT910.Fido.en.CA. Is it alright if the phone was bought from Malaysia?
Click to expand...
Click to collapse
That is JB or ICS?
I don´t for sure what firmware is for your country,I searched a little just now,some people saying that this Android 4.0.4
Blur_Version.673.94.328.XT910.PSHAsiaRetail.en.03 is for Malaysia.
welder73 said:
That is JB or ICS?
I don´t for sure what firmware is for your country,I searched a little just now,some people saying that this Android 4.0.4
Blur_Version.673.94.328.XT910.PSHAsiaRetail.en.03 is for Malaysia.
Click to expand...
Click to collapse
Thanks so much welder. I am downloading Blur_Version.673.94.328.XT910.PSHAsiaRetail.en.03 now. The one I downloaded fails at 6/24... I will try this one. Thank you so much for being with me... I would like to buy you a beer some time.