hey....can u help me with my problem..i need some help regarding my device, Lenovo ideatab A2107. the tablet does not start.it doesnt show any response to any key...i tried soft reseting..n it didnt work. even when i connect it to charger nothing happens...
schaheedh said:
hey....can u help me with my problem..i need some help regarding my device, Lenovo ideatab A2107. the tablet does not start.it doesnt show any response to any key...i tried soft reseting..n it didnt work. even when i connect it to charger nothing happens...
Click to expand...
Click to collapse
check battery reinsert charge it for some time 2) try any other charger 3) go service center if it's in warrenty or not. act like noob my tab is not starting I dont know why
Related
Hi guys,
I flashed WM 6.5 to ma Atom. But right now, it's not working, even bootloader mode. I tried many times CAMERA+ RESET (stylus) then inserted batt. But still nothing happens. Do you guys know what shall i do? I think ma device not dead, because - when i connect to charger plug, the LED light is blinking as i insert batt.
Thanks, waiting your advices.
Eku
im also having the same trouble too...i was flashing my atom using SD card flashing method but then halfway through it it went blank screen...so i took off the battery...now it cant even be switched on...is there anyway to save it now??please please...any assistance is much appreciated...thanks!!!
+1 with the same problem... i searched the forum n found this guide
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
but i couldnt rly figure it out...
adnan_efe said:
+1 with the same problem... i searched the forum n found this guide
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
but i couldnt rly figure it out...
Click to expand...
Click to collapse
you must have basic electronics skills to build the cable from the article and connect to your phone via self made cable with pc and then using the files and drivers attached you can restore your boot loader..if you aren't sure that you can do it by yourself I suggest to send your phone to phone repair shop, where probably they can do this.
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
chief_wolfinjo said:
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
Click to expand...
Click to collapse
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
mengfei said:
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
chief_wolfinjo said:
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
Click to expand...
Click to collapse
try SP Flash method that needs NO battery
http://techideki.com/how-to-root-jiayu-g3-working-recovery-mode/
http://vondroid.com/threads/cwm-recovery-jiayu-g3.4837/
http://androidunbricked.blogspot.com/2013/06/unbrick-your-mtk6577-android-mobile.html
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
mengfei said:
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
Click to expand...
Click to collapse
thank you
I will try that today when i come home.
otherwise Do you know which test points will power up ?
Hi I have the Jiayu g3s which is the quad core variant. I have my phone too but it boots up and goes until the boot logo where it freezes please help
revive JIAYU G3S(G3T)
I BRICKED MY PHONE USING A ROM NOT PROPER FOR MY DEVICE JIAYU G3S(G3T). AFTER THIS, THE PHONE WON'T CHARGE, WON'T START, IT WAS DEAD. BUT AFTER HOURS SPENT SERCHING ON THE INTERNET, I WAS ALLOWED TO FIND WHAT I NEEDED TO REVIVE MY PHONE: ROM "JY-G3-20130523-102107" UNDER "SP_Flash_Tool_v3.1332.0.187". IN WINXP AFTER INSTALLING DRIVERS, MY DEVICE WAS DETECTABLE WHEN I PLUG IT, WITH NO BATTERY IN "SP_Flash_Tool_v3.1332.0.187" , SCATTER - LOADING PUT/MOUNT THE FILE FROM ROM "JY-G3-20130523-102107" NAMED "MT6589_Android_scatter_emmc" AND HIT "FIRMWARE->UPGRADE" CONNECT THE PHONE TO PC WITH NO BATTERY AND PUSH NOT FOR LONG, POWER BUTTON AND VOLUME MINUS/DOWN. AFTER THAT THE PROCESS OF RESTORE THE SOFT IN THE PHONE IT SHOULD STARTING. THANKS TO ANYONE WHO POSTED THE SOFTWARE NEEDED. FOR A FEW DAYS HERE IS A DOWNLOAD LINK
don't forget to add (point) .html at the end
fastupload.rol.ro/8d37335019a3fa55a5decead42e8b667
there is a official rom on this page:
www.talkingmobi.com/rom-download-2/rom-download-2013-may-2014/
scroll through it there are many roms but it is there.
you can also find the flashing guide and tools to download you need to reply to the posts there to see the links i know it is a odd restriction and also no right clicking is allowed
used that to fix my bricked Jiayu G3T and it worked
good luck
I need a help
I bought inew v3 and this is the first time to buy chinese phone
There were some problems so i tried to upgrade the firmare through flash tools but it failed and now no response ; no recovery open and not recognized when connected with usb.....i think every thing formated
Is there any solution to back it to live again
I've had success with ODIN software. Do a search on the boards here for it.
StarFire_MK2 said:
I've had success with ODIN software. Do a search on the boards here for it.
Click to expand...
Click to collapse
No response .....the mobile is dead even not charging
Inew peoblem
ahmedsh22006 said:
No response .....the mobile is dead even not charging
Click to expand...
Click to collapse
same thin my cant be charged, no led lamp on, bt it is recognized withoud battery by computer and can be flasher. But i cant turn it on.
Help pls
puding22 said:
same thin my cant be charged, no led lamp on, bt it is recognized withoud battery by computer and can be flasher. But i cant turn it on.
Help pls
Click to expand...
Click to collapse
Same problem occurred to me today. Did you manage to fix it?
Hello, I have a problem with lenovo s660. I try put rom from A880. I put in mobile with flashtool and everything was good and
I got green circle. Now I try turn phone on but nothing happend . I connect phone back to pc and try to format all, but phone
did not want to connect to pc. Please what to do mobile is dual sim, chinese version (not russian)? Sorry about bad engilsh.
Thank you.
Daniel318 said:
Hello, I have a problem with lenovo s660. I try put rom from A880. I put in mobile with flashtool and everything was good and
I got green circle. Now I try turn phone on but nothing happend . I connect phone back to pc and try to format all, but phone
did not want to connect to pc. Please what to do mobile is dual sim, chinese version (not russian)? Sorry about bad engilsh.
Thank you.
Click to expand...
Click to collapse
Hardbricked.
Befire you can simply putting any rom should u require to make sure it compatible to your phone. If u die hard wanted to have a custom rom but no such option for your phone,sell it and find phone can be custom. I cant help you but from my thought its bricked.
Please help me with lenovo s660w china firmware, based on mtk 6582
Hello everyone on the forum.
I tried to recover a Nubia nx513j that was stuck on boot but when trying to install a ROM I made a mistake and chose the wrong one. Now the phone not even starts (no signal at all, no charge, etc) but is recognizer by the computer when connecting with USB cable.
Can I try to do something to recover it?
Please help me!!
machsantos said:
Hello everyone on the forum.
I tried to recover a Nubia nx513j that was stuck on boot but when trying to install a ROM I made a mistake and chose the wrong one. Now the phone not even starts (no signal at all, no charge, etc) but is recognizer by the computer when connecting with USB cable.
Can I try to do something to recover it?
Please help me!!
Click to expand...
Click to collapse
if u can't enter the recovery or download mode then unfortunately it got broken and u need to send it to a service center