Hi
Today my XZU just bricked itself. Phone was working when I want to change track in Walkman, but when I unplug headphones and hit the power button the phone was not responding, same when I plug charger or connect to pc even in flashmode the phone doesn't respond. Nothing happening, on pc nothing show up. It working on official 4.3, no root, no unlocked bootloader. What was happened to my XZU?
Hold power and vol up for about 5 secs should vibrate 3 times
Sent from my HTC One using Tapatalk
nathlynn22 said:
Hold power and vol up for about 5 secs should vibrate 3 times
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Nothing happend
Ewuetebe said:
Hi
Today my XZU just bricked itself. Phone was working when I want to change track in Walkman, but when I unplug headphones and hit the power button the phone was not responding, same when I plug charger or connect to pc even in flashmode the phone doesn't respond. Nothing happening, on pc nothing show up. It working on official 4.3, no root, no unlocked bootloader. What was happened to my XZU?
Click to expand...
Click to collapse
Open the sim slot, there's a red colored button near sim tray. Press and hold until you feel vibration ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my C6802 using Tapatalk
kumeipark said:
Open the sim slot, there's a red colored button near sim tray. Press and hold until you feel vibrarion...
Sent from my C6802 using Tapatalk
Click to expand...
Click to collapse
aaaaaaand that's working! thanks man! & question is why was that happened to my XZU? and why engineers put reset button there? not like in other phones by holding power button for few sec?
For headstrong hang use reset button and for normal hang use vol up+power until you feel vibration...
Sent from my C6802 using Tapatalk
---------- Post added at 07:48 PM ---------- Previous post was at 07:44 PM ----------
Ewuetebe said:
aaaaaaand that's working! thanks man! & question is why was that happened to my XZU? and why engineers put reset button there? not like in other phones by holding power button for few sec?
Click to expand...
Click to collapse
You know.. It's a SONY lol...
Merry Christmas
Sent from my C6802 using Tapatalk
kumeipark said:
Open the sim slot, there's a red colored button near sim tray. Press and hold until you feel vibration ...
Sent from my C6802 using Tapatalk
Click to expand...
Click to collapse
But didn't help me
After ordinary flashing c6802 india ftf with FlashTool phone rebooted and... nothing more
Not even flash, fastboot, vibration - only black screen.
Accidentally, got it to my ear and I can hear periodic beeps every second
thermatk said:
But didn't help me
After ordinary flashing c6802 india ftf with FlashTool phone rebooted and... nothing more
Not even flash, fastboot, vibration - only black screen.
Accidentally, got it to my ear and I can hear periodic beeps every second
Click to expand...
Click to collapse
Disconnect everything then press the red button until you feel vibration...
If you can't feel the vibration then plug in your wall charger and wait for about an hour and try flashing again...
Sent from my XT925 using Tapatalk
No reaction on red button, the same silent beeps somewhere inside
Plugged in, waiting...
UPD:
Ehm before flashing had 80%+ so it will take a whole lot of time before it discharges If it lost 1% overnight while being on and checking mail I don't know how much it takes when it's off but beeping.
Now I have blinking red led and it reacts to red button with three vibrations. Still no luck connecting and flashing, it is saying that it's a USB HID device and FlashTool says "Device connected with USB debugging off".
At least something, not totally dead.
Exactly how are you trying to get into flash mode?
I got my zu recovered from flashing red led. Have to make sure it if fully powered off.
Related
works now
thanks everyone for trying to help
build a jig or buy one here, it may help you out.
http://cgi.ebay.com/ws/eBayISAPI.dl...12495&ssPageName=STRK:MESELX:IT#ht_623wt_1139
kyle51 said:
I was trying to revert to stock with odin and it froze on 'do not turn off target', so i left it for 5 min but still nothing so disconnected the phone and got the 'phone ! pc' screen but connected straight back to odin from there when i reconnected usb.
I tried again and this time it froze on 'dbdata.rfs' i think so left it for another few min but still nothing so disconnected again thinking id just be able to give it a 3rd try but the phone wouldnt do anything, no recovery mode or download mode, tried all button combos and still nothing.
I found today after trying a few more things that it gets to a screen with red writing.......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RST_STAT = 0X1
PMIC_IRQ1 = 0X3C
PMIC_IRQ2 = 0X0
PMIC_IRQ3 = 0x14
PMIC_IRQ4 = 0x0
PMIC_status1 =0xc0
PMIC_status2 =0x2c
dont know what this means and it doesnt seem to want to do anything from that screen, but hopefully someone can help,
thanks
Click to expand...
Click to collapse
Have you tried using the toolbox?
http://forum.xda-developers.com/showthread.php?t=954509
doesnt it need to be able to turn on to download mode or something for that to work ?? cos it doesnt do anything apart from that screen in the pic
What you have to do is when you see the phone to PC screen hold the power button in until you see that screen pop up for the second time, as soon as it does plug in the USB into your phone and a com port should show up. After that your good to go. You can Odin back to stock from the phone to PC screen. It happens to me every time I use Odin and forget to disable Voodoo first. Good luck man.
kyle51 said:
doesnt it need to be able to turn on to download mode or something for that to work ?? cos it doesnt do anything apart from that screen in the pic
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA Premium App
bigtom624 said:
What you have to do is when you see the phone to PC screen hold the power button in until you see that screen pop up for the second time, as soon as it does plug in the USB into your phone and a com port should show up. After that your good to go. You can Odin back to stock from the phone to PC screen. It happens to me every time I use Odin and forget to disable Voodoo first. Good luck man.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
i dont get that screen, i did before but it connected straight back to odin then froze right at the end just before it finished going back to stock
I did the same thing.... what you need to do is, pull your battery, plug your phone into computer, hold down volume up and down while holding down put your bat back in... odien back to original...
Sent from my SGH-T959 using XDA App
jstevenson1017 said:
I did the same thing.... what you need to do is, pull your battery, plug your phone into computer, hold down volume up and down while holding down put your bat back in... odien back to original...
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
tried that loads of times but still nothing
Kyle, you tried with the battery out, sd card out, and sim card out to get back into download mode right?
Loading odin, usb into pc, plug usb into phone, holding both volume buttons and then inserting the battery back?
Also, you may want to re-download your stock files for ODIN.. and check the MD5 (if they were given) to make sure your downloaded files were good.
yeh, everything out and tried with both my usb's but still just stays black
Do it with odin open... see if it connects and if so just try flashing it...
Sent from my SGH-T959 using XDA App
jstevenson1017 said:
Do it with odin open... see if it connects and if so just try flashing it...
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
have always had it open when trying and still nothing
Man I thought download mode can always be brought back... well the only thing now is make a jig r whatever that is...
Sent from my SGH-T959 using XDA App
The same screen that you posted the pic of happened to me too. After messing with it for five hours r so I was able to get it into download mode. After pulling the bat and plugging it in... so weird that you can't do it...
Sent from my SGH-T959 using XDA App
i read somewhere that someone said you can get to download mode from that screen but iv held buttons, unplugged plugged back in but still nothing
if the phone has to be on or whatever for a jig to work, like the 'phone ! pc' screen it works on maybe plugging a jig in while on that red writing screen will take me to download mode ??
worth a try but need 1 first
I read the same thing when I Google it. They said once on the red screen just go striaght to download mode from there, but I was never able to... it just shut off everytime... ya maybe the jig. Stupid thought but maybe it had something to do with it, when mine finally went to download mode my bat was almost dead the moment I flashed it the phone died when I un plugged it... maybe worth a try...
Sent from my SGH-T959 using XDA App
i cut the charger i got with the phone down to make a jig out of the end of it, i got right down to the board but only looks like its got 4 pins, 2 on the front and 2 at the back
looking closer it looks like theres 2 soldered together on the back and then 1 by itself but the 3 should be on the front
You've probably seen this, but:
http://commons.wikimedia.org/wiki/File:Micro-USB.jpg
http://forum.xda-developers.com/showthread.php?t=819551
i chopped 1 of my usb's up after that but still nothing
after i put the usb in the phone and touch the resistors on, like an hour or 2 later the phone's warm so it does something just doesnt show on the screen
I had similar situation.
Try thid
1. Pull the battery.
2. Connect USB cable to pc.
3. Open odin program in the pc.
3. Hold vol up and down key and power button of phone and plugin usb cable. As soon as you see the vibrant screen leave the POWER button only. You will see android icon - aka download mode. Let go of vol keys
Insert batery now.
Check Odin for com connected.
Now you are ready to flash.
Good luck.
Sent from my SGH-T959 using XDA App
hi to get started apologize for my English
good on the brick problem I have a small x10 solution to me has served
1 close
Sony Ericsson PC Companion 2.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2
first hurdle to
C: \ Program Files (x86) \ Sony Ericsson \ Update Service \ Update Service.exe
run
* Update Service.exe
3
choose your language
accept the license agreement
and press start
4
choose your phone
I chose the u20 is the x10 MiniPro but should work for all models of sony erricson
Select your cell phone
and next
take out the battery from the battery cell by pressing the back button and connect the USB cable
and if the program is reconose your lucky day
I hope this mini tutorial will serve
nice, it's a good ones.....
so many people keep starting new similar thread asking about how to resolve their bricked phone, they think that bricking the phone is like end of the world, although the solution is very simple.
guys, as long as the computer still can detect your bricked phone, it's solvable
Sent from my U20i using xda premium
Please help, my X10 mini isn´t recognized on my PC! I have tried with Back button, Home+Power buttons, Volume -, the Reset button on the back, unplug the battery and nothing seems to work! The red LED just blinked one time. What could i do? Obviously if the USB port can´t recognize my phone, i can´t use SEUS, PC Companion or Flash Tool, altough i already tried.
Sorry 4 my poor english
The red LED is that it is charging the phone battery from your charger and follow the guide
Sent from my U20a using xda premium
dams2011 said:
The red LED is that it is charging the phone battery from your charger and follow the guide
Sent from my U20a using xda premium
Click to expand...
Click to collapse
I know, but it just blinked one time, it´s not blinking anymore, not when i plug the charger/USB and not when i press the Power button.
It might be a broken USB port on my phone? What could i do?
choninos said:
I know, but it just blinked one time, it´s not blinking anymore, not when i plug the charger/USB and not when i press the Power button.
It might be a broken USB port on my phone? What could i do?
Click to expand...
Click to collapse
This is great thanks, but there are already sooooooo many threads explaining exactly this and other ways to fix a bricked phone. Why the need for a new one?
Why not just search?
Cheers,
Evil.
szl.kiev said:
guys, as long as the computer still can detect your bricked phone, it's solvable
Click to expand...
Click to collapse
Yep, that´s my problem, i leave my phone plug to the USB all night but it doesn´t fix the problem. Without battery the phone can´t be found by the PC right?
@evilbarcode I know, there is a lot of threads of people fixing their phones, so I asked for help on this, not on a new thread. I have been searching but i suppose this is physical damage, maybe my battery or the USB port.
Thanks for your help.
choninos said:
Yep, that´s my problem, i leave my phone plug to the USB all night but it doesn´t fix the problem. Without battery the phone can´t be found by the PC right?
@evilbarcode I know, there is a lot of threads of people fixing their phones, so I asked for help on this, not on a new thread. I have been searching but i suppose this is physical damage, maybe my battery or the USB port.
Thanks for your help.
Click to expand...
Click to collapse
So that wasnt directed at you, it was directed at the OP, should have stated that.
Cheers,
Evil.
I know its been asked but ove seen no answers ..what is the button combo that will act as a battery pull or how to load into hboot..
firmbiz94 said:
I know its been asked but ove seen no answers ..what is the button combo that will act as a battery pull or how to load into hboot..
Click to expand...
Click to collapse
To go to hboot go to power and disable fastboot then turn phone off and vol down plus power ought to get you in hboot.
As far as the combo I do not know as I have yet to get the phone lol.
Try holding vol up and down n then power..
I believe it is power + home button for 15 seconds...
I think its power and volume down...or at least it was like that on the EVO 3d.
pretty sure the battery pull is - press and hold power button for 10 seconds
hboot - no idea yet
Lots of different thoughts on this lol
In the One X forum I was told holding power for 10sec shuts phone down. Here I've read that vol + & vol- and hold home. A bit surprised about home, though, since it's a softkey
sent from 2yr old Evo on ICS
scottspa74 said:
Lots of different thoughts on this lol
In the One X forum I was told holding power for 10sec shuts phone down. Here I've read that vol + & vol- and hold home. A bit surprised about home, though, since it's a softkey
sent from 2yr old Evo on ICS
Click to expand...
Click to collapse
Idk which it is as I don't have the phone I wish someone would find out tho...
From the home screen you can hold power volume down and the camera button and the phone will fully shut down. Once it does, release power and then hold it again for a few seconds and you'll be in the boot loader. This is where you'll see it say S-ON and you'll whisper to yourself "For now."
Sent from my EVO LTEusing XDA
I believe the power down is holding just the power button for so many seconds. As far as bootloader I'm not sure I think its still volume down and power. I accidently booted into bootloader today when turning my phone back on after my pt case turned it off. I think I had the volume down partially pressed on accident when hitting power.
Sent from my EVO LTE!!
corcgaigh said:
pretty sure the battery pull is - press and hold power button for 10 seconds
Click to expand...
Click to collapse
Yea im pretty sure the document that got leaked early said that you just hold the power button for 10 seconds.
EDIT: Here you go Page 24. It says Note: If the phone hangs and the touchscreen does not respond, press and hold "power" for about 10 seconds to restart the phone.
EDIT 2: Also found this here
Symptom #2:
If the device cannot power on, and seems that it cannot be charged, it could be that the device is not in default operation mode. This can be caused when the “volume up key” was pressed while pressing the “power” key when device was last powered down. To power on and off the device normally, please be careful to not hold down any other hardware key while pressing the power key during power up operations.
How to fix:
1. Press & hold the power button for up to ~ 20 seconds. The capacitive keys (three keys at bottom of screen) should begin flashing. This indicates that a reset is imminent. Continue to hold power until they stop flashing.
2. Release the power key
3. Press the power key again for 1 second. Wait a few seconds and the device should then power on
i think it's... up, up, down, down, left, right, left, right, B, A, Start...or Select, then Start (for 2 players)
johnnymcmahan said:
i think it's... up, up, down, down, left, right, left, right, B, A, Start...or Select, then Start (for 2 players)
Click to expand...
Click to collapse
No, I tried it, and it didn't work.
Only holding down the power button for about 10 sec worked for me.
I thought the Konami code worked for everything ....weird.
"We're coming from a pure power source."
R1 r2 l1 x left down right up left down right up.
Sent from my EVO using xda premium
Possible Reset ?
So i picked up my Otterbox Defender case today and just noticed something . There is a small hole right next to the headphone jack . It is built into the case also so it makes me think its a reset since they have an access hole built into the case .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't have a needle to test just thought I would share
You sure that's not the second mic for the noise cancellation? I'd be careful of sticking pins in holes
Sent from my PC36100 using XDA
I have no idea good call though . I'm not gonna try now for sure . Glad I didn't have something to stick in the hole also .
Thanks
It's definately the noise cancelling mic seen it in some reviews.
Sent from my EVO LTE!!
FlaXB9R said:
So i picked up my Otterbox Defender case today and just noticed something . There is a small hole right next to the headphone jack . It is built into the case also so it makes me think its a reset since they have an access hole built into the case .
I don't have a needle to test just thought I would share
Click to expand...
Click to collapse
Lol. Too bad you didn't have a needle at the time. I would have been laughing my ass off hard. Definitely the noise canceling Mic.
Sent from my Epic Touch (Blazer ROM) using XDA
Has anybody seen this before?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's my brothers phone and I dont mess with it.
He says it only shows that when you are holding the power button.
He has tried to get into the stock recovery and it still only shows this.
Any ideas?
He is completely stock (no root custom rom or recovery)
Maybe a bad battery?
Any ideas would be very much appreciated.
klabit87 said:
Has anybody seen this before?
It's my brothers phone and I dont mess with it.
He says it only shows that when you are holding the power button.
He has tried to get into the stock recovery and it still only shows this.
Any ideas?
He is completely stock (no root custom rom or recovery)
Maybe a bad battery?
Any ideas would be very much appreciated.
Click to expand...
Click to collapse
Whenever you want to get into recovery with the 3-button combo, just unplug the USB charger. It worked for me back when I had GB on my Fascinate. that was ages ago though.
Just flashed a JB rom
Yeah thanks. I just got into recovery and did a factory reset.
Sent from my DROID RAZR MAXX using xda premium.
I know this is an old thread but this problem never went away. I finally have time to work with it.
I was able to do a factory reset and the problem went away for about 30 mins.
When it started to do it again I went ahead and used odin to flash back to stock even tho it was already stock.
Still no go. I even bought a new battery and still the same problem.
It had been like this for 2 months now.
Any ideas for a possible fix?
Sent from my DROID RAZR using xda premium
klabit87 said:
I know this is an old thread but this problem never went away. I finally have time to work with it.
I was able to do a factory reset and the problem went away for about 30 mins.
When it started to do it again I went ahead and used odin to flash back to stock even tho it was already stock.
Still no go. I even bought a new battery and still the same problem.
It had been like this for 2 months now.
Any ideas for a possible fix?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
It is unplugged? So, you hold all 3 buttons down until SAMSUNG logo shows up, and you continue to hold everything until it turns off again? Then you let go, and it should reboot into recovery.
mvmacd said:
It is unplugged? So, you hold all 3 buttons down until SAMSUNG logo shows up, and you continue to hold everything until it turns off again? Then you let go, and it should reboot into recovery.
Click to expand...
Click to collapse
Last time I had it booted up it was working fine.
I turned it off then back on and all I get to show up is the battery icon.
If I hold all 3 to get to recovery it will go into a bootloop until I let go of the buttons.
If I hold Vol up and power it also goes into a bootloop until I let go.
If I hold Vol down and power the battery icon will stay on screen as long as I hold it and the bottom buttons respond like normal but nothing onscreen happens.
If I just hold power it does the same as Vol down and power.
This is all without being plugged in. And I have tried using 2 different batteries.
klabit87 said:
Last time I had it booted up it was working fine.
I turned it off then back on and all I get to show up is the battery icon.
If I hold all 3 to get to recovery it will go into a bootloop until I let go of the buttons.
If I hold Vol up and power it also goes into a bootloop until I let go.
If I hold Vol down and power the battery icon will stay on screen as long as I hold it and the bottom buttons respond like normal but nothing onscreen happens.
If I just hold power it does the same as Vol down and power.
This is all without being plugged in. And I have tried using 2 different batteries.
Click to expand...
Click to collapse
Ohh, ok I thought you meant it did this when you try to get into recovery..
So it is on stock gingerbread? [EH03]
You could try using Odin and restore it to stock, but you would lose all your apps & data.. I'm not positive that it would do anything, but if after doing that it still has this problem, most likely it is a hardware problem.
I suppose it has been over a year since it was bought? Samsung has a 1-year warranty, I had to send mine in after I got it used on craigslist--twice in fact, they ended up replacing the main board. I sent it in 11 months after it was bought, a month later and I would have had a terrible phone. [stability issues & usb port would not connect to PC, only charge]
Yeah it's well over the one year warranty.
I can eventually get it to boot up if it is plugged in.
I'm thinking it's a hardware problem too.
I have had this problem on stock and I used Odin to flash it to stock anyways and flashed powerwash.
It still has this problem no matter what I do.
I may try an aosp ROM just to see.
Thanks for your input.
Sent from my DROID RAZR using xda premium
Okay, no problem, hope you get it figured out.
Also I'd recommend a cm10 ROM I have ParanoidAndroid which is pretty good if you like fooling with the layout and dpi for each app.
Sent from my Nexus 7 using xda app-developers app
Hi , i have a new Xperia Z2 and i bought it 2 weeks ago . i just got this new weird problem ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The led just light up with red and only appeared if i charge with USB cable . Charging with magnetic cable wouldn't bring the LED lights up . i search over the internet and can't find a solution . some has recommend to :-
Charge it overnight : Done
Press volume down button and power button : Done
Push the small red button beneath the Usb flap to reset : Done
i hope someone has brilliant solution to fix this as i spend my whole savings to buy this ***** SONY Device . Please help :/
thanks .
3vilArt_ said:
Hi , i have a new Xperia Z2 and i bought it 2 weeks ago . i just got this new weird problem ..
The led just light up with red and only appeared if i charge with USB cable . Charging with magnetic cable wouldn't bring the LED lights up . i search over the internet and can't find a solution . some has recommend to :-
Charge it overnight : Done
Press volume down button and power button : Done
Push the small red button beneath the Usb flap to reset : Done
i hope someone has brilliant solution to fix this as i spend my whole savings to buy this ***** SONY Device . Please help :/
thanks .
Click to expand...
Click to collapse
What did you do?
Did you unlock bootloader? Did you flash something? etc
Give more info about what went wrong,
[deleted]
If you haven't messed with the bootloader or flashed some bad ROMs, then it's 90% a bad battery, I have seen this issue many times.
Same problem
Hello,
I've got the same problem. No response at all with any button combination or the red reset button.
If I connect the usb cable to charger or PC red LED turns on but nothing else. The PC doesn't recognize it, not even if I connect it with volume down pressed. I opened it and disconnected the battery. With the battery disconnected it has the same behaviour, only red light if connected.
Any ideas of what I could try?
I wouldn't expect a dead battery causing this. I mean, if the phone can get the power from the charger then it should turn on even with the battery disconnected right?
I was thinking to charge it for two days and see if anything happens, just in case. Otherwise I will need to think on how to discharge the battery manually and see what happens.
I don't to buy a new battery unless I am sure that will help...
3vilArt_ said:
Hi , i have a new Xperia Z2 and i bought it 2 weeks ago . i just got this new weird problem ..
The led just light up with red and only appeared if i charge with USB cable . Charging with magnetic cable wouldn't bring the LED lights up . i search over the internet and can't find a solution . some has recommend to :-
Charge it overnight : Done
Press volume down button and power button : Done
Push the small red button beneath the Usb flap to reset : Done
i hope someone has brilliant solution to fix this as i spend my whole savings to buy this ***** SONY Device . Please help :/
thanks .
Click to expand...
Click to collapse
I am aware this wont help you much, but if you bought it two weeks ago then you should return it to the seller and ask for a replacement. Is it a refurbished unit or a brand new device? Sony will replace or repair it for you.