Hi everyone,
Got my Stratos3 but i've got one question: Description is telling we can adapt gps working time (get signal every sec or every 5 s or once a min to last battery up to 70h on workout. (accruate balanced or power saving mode)
i was not able to get this option in workouts do you know how to change it?
Thanks
i answer myself: it's only available on some workout profils .
Related
Hey, now I have Amazfit Pace, In the past I had MI Band - There was an option to get alert every hour with no movement (I work in the office and sometimes forget hours to move!). How can it be done on the Amazfit?
Thanks
http://forum.xda-developers.com/smartwatch/amazfit/app-step-notify
You can delete...
Just bought a new Stratos and i am unable to get any data on VO2 max
I have tried - Outdoor running, Indoor running(treadmill), Indoor walking (treadmill), Indoor Cycling, Ellipticals
I have done it for 7 days
I see the Training Load information - says Optimum
I also see Recovery Time
I want to see the following (these are advertised features of the watch).
1. VO2 max
2. Training Effect
3. Training Load - yes i see it
4. Recovery time advisor - yes i see it
5. Real time performance condition
6. Personalized training plans
7. Real time coaching
8. Calories burned - i see it
How do i get to these information on the watch or on the app?
Please help.
thanks
jim
Training effect is shown on each workout in watch and app.
VO2max is calculated only if you do an outdoor run for at least 20? minutes with at least 75%? of your maximum heart rate. VO2max will be only correct if you are training running.
For a short and long term fitness indicator check out your resting heart rate.
Hi! I have followed the instruction from the Stratos manual, took a running session for more than 20 mins with the HR above 75% of the maximum heart rate. I have used Polar H10 as external sensor, connected to the watch and I also had bluetooth headphones connected. GPS was on and recorded precisely the trajectory. Unfortunately VO2max still shows „no data”. Should enable Huami Lab or any other feature in order to compute and display VO2? Thanks!
same VO2 Max problem
Hi, I've had this problem for a month now. I have entered all correct personal data into App re Height, Weight, etc, set activity to Running and reached at least 75% heart rate for over 20 mins, ended activity and saved data - Watch itself states "no data" and the App shows an updated date for that activity's VO2 Max but constantly shows a reading of Zero. This was working fine since I've had the watch until now.. I did update the watch to version 2.3.9.0 around the time the issue started, so of course it's possible it is a software issue, but I've struggled to find many other reports of this issue nor any solutions..
Can anyone help?
Many thanks
Cleebers said:
Hi, I've had this problem for a month now. I have entered all correct personal data into App re Height, Weight, etc, set activity to Running and reached at least 75% heart rate for over 20 mins, ended activity and saved data - Watch itself states "no data" and the App shows an updated date for that activity's VO2 Max but constantly shows a reading of Zero. This was working fine since I've had the watch until now.. I did update the watch to version 2.3.9.0 around the time the issue started, so of course it's possible it is a software issue, but I've struggled to find many other reports of this issue nor any solutions..
Can anyone help?
Many thanks
Click to expand...
Click to collapse
Corrupted data, maybe? If you haven't done yet, unpair watch and pair again, if it doesn't fix your problem then do it again but do *not* restore old data to watch when pairing again (it will reset all data on watch). You then may want to turn off the device for about 15s to make sure sensors are also reset and enable continuous HR for at lest 24h and use the watch while you sleep, this will calculate your resting HR and improve futire HR readings.
the firmwere shows VO2 header but readings are missing, this could be possibily because of the fact that gadget does not have built in hardware to measure v02! u would need to buy higher variant to see that reading! quite an old marketing strategy.
Hello everyone,
I have an Amazfit Bip watch for a very short time.
The alarm vibrates only 20 seconds and returns 10 minutes later.
Is it normal that my alarm does not vibrate more than 20 seconds?
I tried to update the firmware with an older version and with a beta but it does not change.
I saw that an Android application can create custom alarms but they need to have the phone next to the watch at the time of waking.
I even started the analysis of the firmware with the help of a Russian forum (except that I have never made assembler and I do not speak a word of Russian) but I quickly gave up!
I have try "Factory reset" but it doesn't change.
Thank you for your answers,
Hcks
Could you tell me if this is the normal behavior of this watch or if I have to send it back?
20s is normal duration. Otherwise it after the battery life.
Hi
I have bought this watch specially for this 20 seconds vibration alarm, but I have only 10 seconds.
Does anybody have idea why is that and how to get 20 seconds ?
Hi All.
I recently got an Amazfit Stratos and I am having a horrible time trying to gps track my outdoor cycle.
I have tried twice, and both times, the GPS just either:
*Intermittently records data
or
*stops recording gps data altogether.
Basic questions?
Urban areas and Woods... same issue
Urban areas are residential.. no high tall building
Weather was good on both occasions
Yes I am waiting for GPS lock
Heart rate and time measurement continue flawlessly (shows data for the entire ride). It's just GPS tracking that is totally weird.
P.S. It's not "drifting" or inaccurate.. it seems to only switch on the gps sporadically... recording "every now and then"...
No errors or issues reported during the activity.
Latest Firmware (Although last nights a new firmware popped up, haven't tried the activity with last night's firmware.)
Both previous activities was on latest firmware at the time. (Yesterday and the day before)
And the REAL issue for me really, is that my wife's Pace records perfectly on the exact same routes where my Stratos just can't get anything usable going...
I have logged "feedback" request with logs using the app, but have not had any response other than, thanks.. we may use your feedback in the future...
From my own conclusions, the gps works.. because when it tracks... the location where it tracks is accurate.. it just doesn't track constantly. See my attached screenshot of my last ride. (Where my wife and her Amazfit pace tracked perfectly)
Any Ideas?
Cant add the image due to post count... How do I add it to this post?
Have you tried factory reset of the watch? Procedure is to unpair it from the app, it will reset itself, start fresh clean and ask for a pairing.
After pairing it will load last 7 days of your work, while all other old data will remain in the app, on your Mi account cloud. What you will have to add separately are only the 3rd party watchfaces, if you have installed them before.
Strongly suggest you try this first, it takes 5 minutes of your time, and you will lose no data.
image
https://ibb.co/rcJXcyx
Thanks Nidza. I will surely try this. I have not yet as the watch is brand new. Upon receiving it It upgraded firmware 3 times from out of the box, and then I started using it.
I will give it a try, surely cant hurt.
Well what do you know. That factory reset seems to have done the trick!
Thanks!
Some points worth noting:
from the factory settings, a few watch settings did not pull through from the sync back to the app after factory reset.
Time format: My previous time format was 24h (Doubt that makes a difference)
Auto Sync: After factory reset, auto sync is off (I had it "on" before). Can't say if this actually causes any bugs to pop up? Maybe the watch tried to sync which interfered with gps functions? I used it yesterday with auto sync off and it worked well. I will investigate if auto sync on causes the GPS issue again.
Thanks again.
Hi guys, is it normal, that my Stratos's Gps show me the speed to much delayed. I checked it with my car, and the gps gets to the same speed as my phone's one, but maybe 10 seconds later. By skiing it can mean worse maximum speed measurement. It is like that with all the Amazefit Startos watches or I have a wrong one? Thanks for the answers!
It's not the same sampling frequency for a car as it is for a walking man. Watch gps do not need to detect non-human speeds, so there is a lower sampling. (Slower).
Same issue again FW version 4.2.8.0:
stops recording gps data altogether after a few minutes.
I've reset and unpaired the clock twice but the issue remains.
Any advice?
Hello
My watch has been working good for the last 3 months but lately acquiring GPS not working the first time when I enter running, I have to closecand open it again, also GPS is giving me crazy paces I am a beginner+ runner but it gives me pace of 1min 27sec / km while it should be around 5min 15sec, I tried update to firmware 2.8.5, but same issue I even tried factory reset same issue.
Can you please tell me what is the issue and how to fix ?